BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-94419High confidence

Client session cache reference poisoning allows resumption with wrong server

wolfSSL · wolfSSL

2.3LowCVSS 4.0
Recommended action
Patch only the product branches with a verified fix

Low technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 3 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityLowOperational priority:Low, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.10% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict local access and enforce least privilege on affected hosts.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs wolfSSL wolfSSL and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: No default targetRemediation target: Normal maintenance

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 3 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Distribution package intelligence

Release-specific package status

Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.

4 package states
Package result overrides the generic status

BlackTree has verified remediation for at least one product or source, but the relevant distribution still reports no fixed package for 3 affected package states shown here. Treat those rows as affected with no fix until that distribution publishes a fixed version.

Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Distribution releaseSource packageVendor stateFixed versionEvidence
Debian trixietrixie · sourcewolfsslAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 7 Oct 2026
Debian bookwormbookworm · sourcewolfsslAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 7 Oct 2026
Debian sidsid · sourcewolfsslAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 7 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivewolfsslUnder evaluationCanonical reports that the package might be affected and still needs evaluation or fixing.Not published in this feedCanonical Ubuntu Security ↗Source updated 7 Oct 2026
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-87906

No EUVD known-exploited evidence

Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
2.3 · CVSS 4.0
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

Low technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 3 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.

What

Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.

Why

The affected component does not establish the requesting party's identity reliably before granting access.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.

Why

The affected component does not establish the requesting party's identity reliably before granting access.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
an adjacent network → Improper Authentication → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Adjacent
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
High: exploitation depends on specific conditions
Security boundary
Not a CVSS 4.0 base metric
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-287 ↗

CWE-287: Improper Authentication. When an actor claims to have a given identity, the product does not prove or insufficiently proves that the claim is correct.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:4.0/AV:A/AC:H/AT:P/PR:N/UI:N/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N

Common Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.

AVAdjacentAttack vector: The attacker must be on an adjacent or logically close network.ACHighAttack complexity: Successful exploitation depends on specific conditions outside the attacker's direct control.ATPresentAttack requirements: A particular deployment or execution condition must be present.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.VCLowVulnerable-system confidentiality: A successful attack can cause a limited loss.VILowVulnerable-system integrity: A successful attack can cause a limited loss.VANoneVulnerable-system availability: No direct loss is represented by this metric.SCNoneSubsequent-system confidentiality: No direct loss is represented by this metric.SINoneSubsequent-system integrity: No direct loss is represented by this metric.SANoneSubsequent-system availability: No direct loss is represented by this metric.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
UnauthenticatedCWE-287
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-87906Official EUVD mapping

Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.

Official EUVD record ↗
JVN iPedia · Japanese · JVNDB-2026-036271wolfSSL Inc.のwolfSSLにおける認証に関する脆弱性

NO_SESSION_CACHE_REFが設定されていない場合、wolfSSL_get_session()はセッションオブジェクトを返さず、プロセス全体のSessionCache内の{row、index、hash(sessionID)}形式のClientSession参照を返します。そしてClientSessionToSession()はそのハッシュの検証のみを行います。TLS 1.2のセッションIDはサーバーによって選択され平文で送信されるため、AddSessionToCache()は同じIDの他のサーバーのセッションと一致し、クライアント側のエントリをそのサーバーのマスターシークレット、暗号スイート、バージョンで上書きしますが、ハンドルは解決し続けます。書き込み経路ではピア、アプリケーションのサーバーID、またはWOLFSSL_CTXを比較しません。そのハンドルを介して再開すると、Certificateメッセージが送信されない省略ハンドシェイクが発生し、チェーン検証もwolfSSL_check_domain_name()も実行されないため、攻撃者はその接続全体を元のサーバーとして受け入れさせることが可能になります。影響を受けるビルドは、NO_SESSION_CACHE_REF、NO_SESSION_CACHE、NO_CLIENT_CACHE、TITAN_SESSION_CACHEがすべて未定義のものであり、これは標準の./configureや--enable-opensslextra、--enable-opensslallを含みます。15の統合オプションはNO_SESSION_CACHE_REFを定義しているため影響を受けません。これには--enable-all、--enable-distro、--enable-curl、--enable-nginx、--enable-haproxy、--enable-stunnel、--enable-wpasおよびOPENSSL_COMPATIBLE_DEFAULTSファミリーのその他のオプションが含まれ、さらに--enable-leanpsk、--enable-leantls、--enable-lowresource、--enable-tinytls13はキャッシュを完全に無効化します。アプリケーションはレガシーな参照フロー、すなわちwolfSSL_get_session()またはSSL_get_session()の後にwolfSSL_set_session()を使用する必要があります。wolfSSL_get1_session()はセッションオブジェクト自体を返すため影響を受けません。またwolfSSL_SetServerID()のルックアップも影響を受けません。TLS 1.2以下およびDTLS 1.2以下のみが対象であり、TLS 1.3および空のServerHelloセッションIDを用いたチケット再開はクライアントが選択したキャッシュキーを使用するため影響がありません。毒されたエントリはプロセス全体のキャッシュに存在し、WOLFSSL_CTXの境界を越えて残存し、エントリが削除されるかセッションがタイムアウトするまで（デフォルト500秒）持続します。v5.3.0からv5.9.2のリリースが影響を受けており、修正ではキャッシュに対して書き込みごとの世代カウンターを追加し、WOLFSSL_CACHE_VERSIONを2から3に引き上げたため、古いビルドで永続化されたキャッシュは修正済みビルドで拒否されます。

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
wolfSSL: 5.3.0 ≤ 5.9.2
Fixed
An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 27 Sept 2026 · Last source change 29 Sept 2026, 16:50 UTC · CWE-287 · Improper Authentication

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-09-27
European sourceENISA EUVD · EUVD-2026-87906
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD enriched

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. BlackTree coverageBlackTree article coverage changed from no BlackTree article to 1 BlackTree article.
    Before
    no BlackTree article
    After
    1 BlackTree article
    BlackTree editorial ↗
  2. Vendor guidanceAuthoritative vendor guidance changed: added patch: github.com/11500; added remediation: github.com/11500.
    Before
    no authoritative guidance recorded
    After
    patch: github.com/11500 · remediation: github.com/11500
    facts@wolfssl.com ↗
  3. Affected versionsThe structured affected or fixed version information changed.
    Before
    wolfSSL: 5.3.0 ≤ 5.9.2 · Fixed: No fixed version is explicitly recorded in the structured CVE data.
    After
    wolfSSL: 5.3.0 ≤ 5.9.2 · Fixed: An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
    CNA ↗
  4. Remediation statusRemediation status changed from Awaiting fix to Patch available.
    Before
    Awaiting fix
    After
    Patch available
    facts@wolfssl.com ↗
  5. ENISA EUVD mappingEUVD-2026-87906 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-87906"}
    ENISA EUVD ↗
  6. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release or patch reference recorded
ENISA EUVD · EUVD-2026-87906↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-94419 · cve.blacktree.nl