BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-93318High confidence

Cache poisoning via unvalidated image layer DiffIDs

moby · BuildKit

Official source article: GitHub GHSA-F2V9-HPRR-32Q3 ↗. Check the applicable product and release in the original source.

7.5HighCVSS 4.0
Recommended action
Patch only the product branches with a verified fix

High technical severity; prioritise exposed affected systems while verifying vendor guidance. Verified remediation exists for at least one product or source, but 251 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityHighOperational priority:High, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.17% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict the affected network interface to trusted sources where business-safe.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs moby BuildKit and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 30 daysRemediation target: Within 180 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 251 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Distribution package intelligence

Release-specific package status

ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.

2 package states
Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Distribution releaseSource packageVendor stateFixed versionEvidence
Ubuntu 24.04 LTSnoble · esm-appsdocker.ioUnder evaluationCanonical reports that the package might be affected and still needs evaluation or fixing.Not published in this feedCanonical Ubuntu Security ↗Source updated 7 Oct 2026
Ubuntu 24.04 LTSnoble · esm-appsdocker.io-appUnder evaluationCanonical reports that the package might be affected and still needs evaluation or fixing.Not published in this feedCanonical Ubuntu Security ↗Source updated 7 Oct 2026
Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
CVE-2026-93318 · CSAF 2.0 · revision 2 · interimSUSE Product Security TeamCVE-2026-93318
251 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • docker as component of SUSE Linux Enterprise Desktop 15 SP7
  • docker-buildx as component of SUSE Linux Enterprise Desktop 15 SP7
  • docker as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • docker-bash-completion as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • docker-buildx as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • docker-stable as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • docker-stable-bash-completion as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • docker as component of SUSE Linux Enterprise High Performance Computing 15 SP1
  • docker-bash-completion as component of SUSE Linux Enterprise High Performance Computing 15 SP1
  • docker as component of SUSE Linux Enterprise High Performance Computing 15 SP2
  • docker-bash-completion as component of SUSE Linux Enterprise High Performance Computing 15 SP2
  • docker-buildx as component of SUSE Linux Enterprise High Performance Computing 15 SP2
Summary
A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer contents. If a BuildKit daemon with shared or persistent cache first processes such a malicious image, a later build using the victim image may mount the attacker-controlled layer contents as the base image. This can allow code from the malicious image to run in the victim build, for example by replacing a commonly executed path such as /bin/sh. The attacker-controlled code may read build secrets mounted into the build, access other build resources, alter output artifacts, or hang the build. The issue affects both regular snapshotters and lazy-pulling snapshotters such as stargz.
Remediation
No remediation text is recorded.
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-92532

No EUVD known-exploited evidence

A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer contents. If a BuildKit daemon with shared or persistent cache first processes such a malicious image, a later build using the victim image may mount the attacker-controlled layer contents as the base image. This can allow code from the malicious image to run in the victim build, for example by replacing a commonly executed path such as /bin/sh. The attacker-controlled code may read build secrets mounted into the build, access other build resources, alter output artifacts, or hang the build. The issue affects both regular snapshotters and lazy-pulling snapshotters such as stargz.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
7.5 · CVSS 4.0
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

High technical severity; prioritise exposed affected systems while verifying vendor guidance. Verified remediation exists for at least one product or source, but 251 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer contents. If a BuildKit daemon with shared or persistent cache first processes such a malicious image, a later build using the victim image may mount the attacker-controlled layer contents as the base image. This can allow code from the malicious image to run in the victim build, for example by replacing a commonly executed path such as /bin/sh. The attacker-controlled code may read build secrets mounted into the build, access other build resources, alter output artifacts, or hang the build. The issue affects both regular snapshotters and lazy-pulling snapshotters such as stargz.

What

A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer contents. If a BuildKit daemon with shared or persistent cache first processes such a malicious image, a later build using the victim image may mount the attacker-controlled layer contents as the base image. This can allow code from the malicious image to run in the victim build, for example by replacing a commonly executed path such as /bin/sh. The attacker-controlled code may read build secrets mounted into the build, access other build resources, alter output artifacts, or hang the build. The issue affects both regular snapshotters and lazy-pulling snapshotters such as stargz.

Why

The product does not validate or incorrectly validates the integrity check values or checksums of a message. This may prevent it from detecting if the data has been modified or corrupted in transmission.

How

An attacker operating through a network path may attempt exploitation when the stated preconditions are met. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer contents. If a BuildKit daemon with shared or persistent cache first processes such a malicious image, a later build using the victim image may mount the attacker-controlled layer contents as the base image. This can allow code from the malicious image to run in the victim build, for example by replacing a commonly executed path such as /bin/sh. The attacker-controlled code may read build secrets mounted into the build, access other build resources, alter output artifacts, or hang the build. The issue affects both regular snapshotters and lazy-pulling snapshotters such as stargz.

Why

The product does not validate or incorrectly validates the integrity check values or checksums of a message. This may prevent it from detecting if the data has been modified or corrupted in transmission.

How

An attacker operating through a network path may attempt exploitation when the stated preconditions are met. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
a network path → Improper Validation of Integrity Check Value → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Network
Privileges required
None: unauthenticated exploitation is possible
User interaction
Active interaction required
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Not a CVSS 4.0 base metric
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-354 ↗

CWE-354: Improper Validation of Integrity Check Value. The product does not validate or incorrectly validates the integrity check values or checksums of a message. This may prevent it from detecting if the data has been modified or corrupted in transmission.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:A/VC:H/VI:H/VA:L/SC:N/SI:N/SA:N

Common Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.

AVNetworkAttack vector: The vulnerable component can be reached over a network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.ATPresentAttack requirements: A particular deployment or execution condition must be present.PRNonePrivileges required: The attacker does not need an account or existing privileges.UIActiveUser interaction: A user must take a deliberate action for exploitation to succeed.VCHighVulnerable-system confidentiality: A successful attack can cause a major loss.VIHighVulnerable-system integrity: A successful attack can cause a major loss.VALowVulnerable-system availability: A successful attack can cause a limited loss.SCNoneSubsequent-system confidentiality: No direct loss is represented by this metric.SINoneSubsequent-system integrity: No direct loss is represented by this metric.SANoneSubsequent-system availability: No direct loss is represented by this metric.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
NetworkUnauthenticatedCWE-354
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-92532Official EUVD mapping

A malicious image can advertise DiffIDs from another image while containing different layer contents. In affected versions, BuildKit could use the advertised DiffIDs to derive cache and snapshot identity without validating that they matched the actual layer contents. If a BuildKit daemon with shared or persistent cache first processes such a malicious image, a later build using the victim image may mount the attacker-controlled layer contents as the base image. This can allow code from the malicious image to run in the victim build, for example by replacing a commonly executed path such as /bin/sh. The attacker-controlled code may read build secrets mounted into the build, access other build resources, alter output artifacts, or hang the build. The issue affects both regular snapshotters and lazy-pulling snapshotters such as stargz.

Official EUVD record ↗
BSI · German · WID-SEC-2026-3741BuildKit: Mehrere Schwachstellen

Ein Angreifer kann mehrere Schwachstellen in BuildKit ausnutzen, um beliebigen Programmcode auszuführen, Sicherheitsmaßnahmen zu umgehen, Daten zu manipulieren oder offenzulegen sowie einen Denial-of-Service-Zustand auszulösen.

Official advisory ↗
Cyber Security Agency of Singapore · English · CSA-SB-20261007Security Bulletin 7 Oct 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 7 Oct 2026, published on 7 October 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
Fixed
An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
No verified workaround is recorded. If business-safe, reduce exposure to the affected interface and allow only trusted sources until authoritative guidance is available.
04

Evidence and provenance

Published 5 Oct 2026 · Last source change 5 Oct 2026, 19:06 UTC · CWE-354 · Improper Validation of Integrity Check Value

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-10-06
European sourceENISA EUVD · EUVD-2026-92532
Product sourceVendor CSAF · SUSE Product Security Team
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD awaiting enrichment

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. ENISA EUVD mappingEUVD-2026-92532 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-92532"}
    ENISA EUVD ↗
  2. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
ENISA EUVD · EUVD-2026-92532↗Vendor CSAF · SUSE Product Security Team↗CVE authority or vendor reference · GitHub GHSA-F2V9-HPRR-32Q3↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-93318 · cve.blacktree.nl