BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-90711High confidence

proxy-addr vulnerable to IP spoofing via IPv4-mapped IPv6 trust subnet

proxy-addr · proxy-addr

Official source article: GitHub GHSA-JQCG-44MW-7W3H ↗. Check the applicable product and release in the original source.

9.1CriticalCVSS 3.1
Recommended action
Patch only the product branches with a verified fix

Critical technical impact with a remotely reachable, unauthenticated path; no CISA KEV confirmation is currently recorded. Verified remediation exists for at least one product or source, but 2 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityCriticalOperational priority:Critical, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • The selected CVSS metric records a network-reachable, unauthenticated path with no user interaction.
  • EPSS is 0.33% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict the affected network interface to trusted sources where business-safe.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs proxy-addr proxy-addr and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 3 daysRemediation target: Within 90 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 2 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Distribution package intelligence

Release-specific package status

Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.

5 package states
Package result overrides the generic status

BlackTree has verified remediation for at least one product or source, but the relevant distribution still reports no fixed package for 2 affected package states shown here. Treat those rows as affected with no fix until that distribution publishes a fixed version.

Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Distribution releaseSource packageVendor stateFixed versionEvidence
Debian trixietrixie · sourcenode-proxy-addrAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 5 Oct 2026
Debian bookwormbookworm · sourcenode-proxy-addrAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 5 Oct 2026
Debian forkyforky · sourcenode-proxy-addrVendor fix publishedDebian records a fixed source-package version for this release.2.0.8+~cs2.3.7-1Debian Security Tracker ↗Source updated 5 Oct 2026
Debian sidsid · sourcenode-proxy-addrVendor fix publishedDebian records a fixed source-package version for this release.2.0.8+~cs2.3.7-1Debian Security Tracker ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivenode-proxy-addrUnder evaluationCanonical reports that the package might be affected and still needs evaluation or fixing.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-78300

No EUVD known-exploited evidence

proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
9.1 · CVSS 3.1
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

Critical technical impact with a remotely reachable, unauthenticated path; no CISA KEV confirmation is currently recorded. Verified remediation exists for at least one product or source, but 2 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.

What

proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.

Why

This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.

How

An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.

Why

This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.

How

An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
a network path → Authentication Bypass by Spoofing → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Network
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Unchanged: impact remains within the vulnerable component's security authority
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-290 ↗

CWE-290: Authentication Bypass by Spoofing. This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N

Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.

AVNetworkAttack vector: The vulnerable component can be reached over a network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CHighConfidentiality impact: A successful attack can cause a major loss.IHighIntegrity impact: A successful attack can cause a major loss.ANoneAvailability impact: No direct loss is represented by this metric.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
NetworkUnauthenticatedCWE-290
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-78300Official EUVD mapping

proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.

Official EUVD record ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
proxy-addr: 1.1.0 < 2.0.8
Fixed
proxy-addr: 2.0.8
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
No verified workaround is recorded. If business-safe, reduce exposure to the affected interface and allow only trusted sources until authoritative guidance is available.
04

Evidence and provenance

Published 15 Sept 2026 · Last source change 15 Sept 2026, 14:48 UTC · CWE-290 · Authentication Bypass by Spoofing

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-09-15
European sourceENISA EUVD · EUVD-2026-78300
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD awaiting enrichment

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. ENISA EUVD mappingEUVD-2026-78300 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-78300"}
    ENISA EUVD ↗
  2. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-90711 · cve.blacktree.nl