BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-86863High confidence

pgAdmin 4: Authentication bypass via a client-controlled identity header in Webserver authentication mode

pgadmin.org · pgAdmin 4

9.3CriticalCVSS 4.0
Recommended action
Within 72 hours

Critical technical impact with a remotely reachable, unauthenticated path; no CISA KEV confirmation is currently recorded.

Patch available
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityCriticalOperational priority:Critical, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • The selected CVSS metric records a network-reachable, unauthenticated path with no user interaction.
  • EPSS is 0.58% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict the affected network interface to trusted sources where business-safe.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs pgadmin.org pgAdmin 4 and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 3 daysRemediation target: Within 90 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
CVE-2026-86863 · CSAF 2.0 · revision 3 · finalRed Hat Product Securitypgadmin4: authentication bypass via a client-controlled identity header in Webserver authentication mode
1 known not affected

The vendor explicitly states that these products are not affected by this CVE.

  • All currently supported Red Hat products
Summary
A flaw was found in pgAdmin 4. When the 'webserver' authentication source is enabled, a remote attacker can bypass authentication by supplying a client-controlled identity header. This allows the attacker to authenticate as any user, including an Administrator, without providing valid credentials. This could lead to full control over the pgAdmin installation.
Remediation
No remediation text is recorded.
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-81895

No EUVD known-exploited evidence

pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
9.3 · CVSS 4.0
Advisory evidence
No linked advisory details stored yet
Recommended actionWithin 72 hours

Critical technical impact with a remotely reachable, unauthenticated path; no CISA KEV confirmation is currently recorded.

Patch available
01

What, why and how

pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18.

What

pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18.

Why

This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.

How

An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18.

Why

This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.

How

An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
a network path → Authentication Bypass by Spoofing → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Network
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Not a CVSS 4.0 base metric
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-290 ↗

CWE-290: Authentication Bypass by Spoofing. This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N

Common Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.

AVNetworkAttack vector: The vulnerable component can be reached over a network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.ATNoneAttack requirements: No additional deployment or execution condition is required.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.VCHighVulnerable-system confidentiality: A successful attack can cause a major loss.VIHighVulnerable-system integrity: A successful attack can cause a major loss.VAHighVulnerable-system availability: A successful attack can cause a major loss.SCNoneSubsequent-system confidentiality: No direct loss is represented by this metric.SINoneSubsequent-system integrity: No direct loss is represented by this metric.SANoneSubsequent-system availability: No direct loss is represented by this metric.
Post-exploitation / living off the land
Stolen credentials, tokens and legitimate administration functions may provide continued access without deploying a large custom toolset.
NetworkUnauthenticatedCWE-290
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-81895Official EUVD mapping

pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18.

Official EUVD record ↗
BSI · German · WID-SEC-2026-3446pgAdmin: Mehrere Schwachstellen

Ein Angreifer kann mehrere Schwachstellen in pgAdmin ausnutzen, um Dateien zu manipulieren, erweiterte Berechtigungen zu erlangen, Sicherheitsmaßnahmen zu umgehen, vertrauliche Informationen offenzulegen oder einen Denial-of-Service-Zustand auszulösen.

Official advisory ↗
Cyber Security Agency of Singapore · English · CSA-SB-20260923Security Bulletin 23 Sep 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 23 Sep 2026, published on 23 September 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
CSIRT Italia · Italian · risolte-vulnerabilita-in-pgadminRisolte vulnerabilità in pgAdmin

Rilasciato aggiornamento che risolve 2 vulnerabilità di sicurezza, con gravità “critica”, in pgAdmin, nota piattaforma di amministrazione e sviluppo open source per PostgreSQL. Tali vulnerabilità, qualora sfruttate, potrebbero consentire a un utente malintenzionato di eludere i meccanismi di autenticazione e di scrivere file arbitrari sul filesystem dei sistemi interessati

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Patch available
Affected
pgAdmin 4: 6.2 < 9.18
Fixed
An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
Action
Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
Workaround
No verified workaround is recorded. If business-safe, reduce exposure to the affected interface and allow only trusted sources until authoritative guidance is available.
Official vendor articles1 stored document

Linked articles are downloaded and versioned as source evidence. A CVE mention or approved update relationship does not, by itself, verify a fix for every product branch.

04

Evidence and provenance

Published 17 Sept 2026 · Last source change 17 Sept 2026, 16:01 UTC · CWE-290 · Authentication Bypass by Spoofing

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-09-18
European sourceENISA EUVD · EUVD-2026-81895
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD enriched

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. ENISA EUVD mappingEUVD-2026-81895 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-81895"}
    ENISA EUVD ↗
  2. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
  3. Vendor guidanceAuthoritative vendor guidance changed: added patch: github.com/10383; added remediation: github.com/10383.
    Before
    no authoritative guidance recorded
    After
    patch: github.com/10383 · remediation: github.com/10383
    github.com ↗
  4. Affected versionsThe structured affected or fixed version information changed.
    Before
    pgAdmin 4: 6.2 < 9.18 · Fixed: No fixed version is explicitly recorded in the structured CVE data.
    After
    pgAdmin 4: 6.2 < 9.18 · Fixed: An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
    CNA ↗
  5. Remediation statusRemediation status changed from Awaiting fix to Patch available.
    Before
    Awaiting fix
    After
    Patch available
    github.com ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release or patch reference recorded
ENISA EUVD · EUVD-2026-81895↗Vendor CSAF · Red Hat Product Security↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-86863 · cve.blacktree.nl