BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-81573High confidence

Improper Access Control in Local-Only Configuration Commands

wibu-systems-ag · codemeter-runtime

8.6HighCVSS 3.1
Recommended action
Patch only the product branches with a verified fix

High technical severity; prioritise exposed affected systems while verifying vendor guidance. Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityHighOperational priority:High, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • The selected CVSS metric records a network-reachable, unauthenticated path with no user interaction.
  • EPSS is 0.40% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict the affected network interface to trusted sources where business-safe.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs wibu-systems-ag codemeter-runtime and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 30 daysRemediation target: Within 180 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

4 current
sca-2026-0011 · CSAF 2.0 · revision 2 · finalSICK PSIRTCVE-2026-81573
17 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • Sentio Creator < 2026.3
  • SICK CODE-LOC all versions
  • SICK LiDAR-LOC all versions
  • SICK APU0G00 with Image Version 1.0.0.7 and Image ID 30
  • SICK APU0G00 with Image Version 1.0.0.2 and Image ID 38
  • SICK APU0G50 with Image Version 1.0.0.2 and Image ID 38
  • SICK APU0G50 with Image Version 1.0.0.1 and Image ID 45
  • SICK APU0G03 with Image Version 1.0.0.1 and Image ID 41
  • SICK APU0G03 with Image Version 1.0.0.2 and Image ID 36
  • SICK APU3F00 with Image Version 1.0.0.0 and Image ID 27
  • SICK APU3F00 with Image Version 1.0.0.0 and Image ID 46
  • SICK APU4600 with Image Version 1.1.0.1 and Image ID 18
Summary
If CodeMeter Runtime is configured as a server, the configuration command handler does not enforce network-origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.
Remediation
Customers are strongy recommended to update the Codemeter Runtime to the latest version (>= 9.10). The software can be downloaded directly on the Wibu Systems website: https://www.wibu.com/de/support/anwendersoftware/anwendersoftware.html
3BHS973333 · CSAF 2.0 · revision 1 · finalABB Product Security Incident Response Team (PSIRT)CVE-2026-81573
5 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • ABB AC 800PEC <5.4.5.2
  • ABB AC 800PEC ARM /all
  • ABB AC 800PEC Tool /all
  • ABB AC 800PEC Tool Cheetah /all
  • ABB Control Terminal (xCT) /all
Summary
If CodeMeter Runtime is configured as a server, the configuration command handler does not enforce networkorigin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover. CodeMeter Runtime is only affected by the vulnerabilities listed below if it is configured as a server. This is not the default. To verify the setting, check the profiling value IsNetworkServer: - IsNetworkServer=1: configured as a server (affected). - IsNetworkServer=0: not configured as a server.
Remediation
The problem is corrected by Wibu in the following product versions: - CodeMeter Runtime 8.41a - CodeMeter Runtime 9.10 ABB recommends that customers apply the update at their earliest convenience and install the version compatible with their operating system. Both versions are available for download from the Wibu download site and can be updated independent of the tool installation: https://www.wibu.com/support/user/user-software.html. An updated version of CodeMeter Runtime containing the fixes will be integrated into the following tool versions: - AC 800PEC: Version 5.4.5.2 - AC 800PEC ARM: Version 3.0.0.0 (Expected by Q1 2027) - AC 800PEC Tool: Not planned, in classic lifecycle phase - AC 800PEC Tool Cheetah: Version 3.0.0.0 (Expected by Q1 2027) - Control Terminal (xCT): Not planned, in classic lifecycle phase
2NGA003144 · CSAF 2.0 · revision 1 · finalABB Product Security Incident Response Team (PSIRT)CVE-2026-81573
1 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • WIBU-Systems CodeMeter Runtime <8.41a installed with ABB AbilityTM zenon <=14
Summary
If CodeMeter Runtime before 8.41a or 9.10 is configured as a server, the configuration command handler does not enforce network- origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.
Remediation
ABB recommends the following mitigation measures: - Update the WIBU-Systems CodeMeter Runtime to version 8.41a or later. - The latest CodeMeter Runtime software is available from the WIBU-Systems download page: User Software - Wibu-Systems, please see the References section for the corresponding link. - Where upgrading is not feasible, ABB recommends that asset owners perform a risk assessment and implement compensating controls such as network isolation, access restrictions, and enhanced monitoring of affected systems. ABB recommends that customers apply the update at earliest convenience. The vulnerabilities associated with CVE-2026-81573, CVE-2026-81574, CVE-2026-81575 and CVE-2026-81576 are exploitable only when the WIBU-Systems CodeMeter Runtime is configured as a network server, which is not the de-fault configuration. The CVE-2026-81572 vulnerability requires local access to the affected Windows system and execution by a low-privileged user. Consequently, systems with restricted local access, proper privilege management, and limited network exposure are less likely to be successfully compromised. Refer to section “General security recommendations” for further advise on how to keep your system secure.
3ADR011572 · CSAF 2.0 · revision 1 · finalABB Product Security Incident Response Team (PSIRT)CVE-2026-81573
4 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • ABB Automation Builder >2.10.0
  • ABB Drive Application Bulder /all
  • ABB Virtual Drive >1.5.1
  • ABB Virtual Drive Plus >1.70
Summary
If CodeMeter Runtime is configured as a server, the configuration command handler does not enforce networkorigin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover. CodeMeter Runtime is only affected by the vulnerabilities listed below if it is configured as a server. This is not the default. To verify the setting, check the profiling value IsNetworkServer: - IsNetworkServer=1: configured as a server (affected). - IsNetworkServer=0: not configured as a server.
Remediation
The problem is corrected by Wibu in the following product versions: - CodeMeter Runtime 8.41a - CodeMeter Runtime 9.10 ABB recommends that customers apply the update at earliest convenience. Both versions are available for download from the Wibu download site and can be updated independent of the tool installation: https://www.wibu.com/support/user/user-software.html An updated version of CodeMeter Runtime containing the fixes will be integrated into the following tool versions: - Automation Builder: Version 2.10.0 (expected by Q1/2027) - Drive Application Bulder: not planned, will be transferred to the Classic lifecycle phase end of Q3/2026 - Virtual Drive: Version 1.5.1 - Virtual DrivePlus: Version 1.70 (expected by Q4/2026)
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-66980

No EUVD known-exploited evidence

If CodeMeter Runtime before 8.41a or 9.10 is configured as a server, the configuration command handler does not enforce network- origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
8.6 · CVSS 3.1
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

High technical severity; prioritise exposed affected systems while verifying vendor guidance. Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

If CodeMeter Runtime before 8.41a or 9.10 is configured as a server, the configuration command handler does not enforce network- origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.

What

If CodeMeter Runtime before 8.41a or 9.10 is configured as a server, the configuration command handler does not enforce network- origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.

Why

The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.

How

An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

If CodeMeter Runtime before 8.41a or 9.10 is configured as a server, the configuration command handler does not enforce network- origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.

Why

The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.

How

An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
a network path → Improper Access Control → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Network
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Unchanged: impact remains within the vulnerable component's security authority
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-284 ↗

CWE-284: Improper Access Control. The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:L

Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.

AVNetworkAttack vector: The vulnerable component can be reached over a network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CLowConfidentiality impact: A successful attack can cause a limited loss.IHighIntegrity impact: A successful attack can cause a major loss.ALowAvailability impact: A successful attack can cause a limited loss.
Post-exploitation / living off the land
Stolen credentials, tokens and legitimate administration functions may provide continued access without deploying a large custom toolset.
NetworkUnauthenticatedCWE-284
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-66980Official EUVD mapping

If CodeMeter Runtime before 8.41a or 9.10 is configured as a server, the configuration command handler does not enforce network- origin restrictions. Commands intended only for local or same-network clients can therefore be executed by arbitrary remote peers. An attacker can read potentially sensitive configuration data and overwrite selected values in Server.ini. This does include the hash of the credentials for the CodeMeter WebAdmin, enabling WebAdmin takeover.

Official EUVD record ↗
BSI · German · WID-SEC-2026-3004Wibu-Systems CodeMeter Runtime: Mehrere Schwachstellen

Ein Angreifer kann mehrere Schwachstellen in Wibu-Systems CodeMeter Runtime ausnutzen, um Sicherheitsmaßnahmen zu umgehen, vertrauliche Informationen offenzulegen, Daten zu manipulieren, Berechtigungen zu erweitern und Administratorrechte zu erlangen oder Denial-of-Service-Zustände herbeizuführen.

Official advisory ↗
Cyber Security Agency of Singapore · English · CSA-SB-20260902Security Bulletin 2 Sept 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 2 Sept 2026, published on 2 September 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
NCSC-NL · Dutch · NCSC-2026-0333Kwetsbaarheden verholpen in CodeMeter Runtime van Wibu-Systems

De kwetsbaarheden bevinden zich in verschillende onderdelen van CodeMeter Runtime, met name in versies voor 8.41a en 9.10. Een lokale aanvaller kan misbruik maken van onjuiste verificatie van NTFS reparse points bij het aanmaken van tijdelijke bestanden door cmu.exe, wat kan leiden tot het verwijderen van willekeurige systeembestanden met System-privileges en daarmee lokale privilege-escalatie. Daarnaast bevat de configuratie command handler een fout waardoor netwerkrestricties niet correct worden afgedwongen, wat een aanvaller op afstand in staat stelt om ongeautoriseerde toegang te verkrijgen tot gevoelige configuratiegegevens en controle over de WebAdmin interface. Verder is er een input sanitization probleem in de logger module, waardoor format specifiers kunnen worden geïnjecteerd, wat kan leiden tot crashes en mogelijk informatielekken, zowel lokaal als op afstand, vooral in combinatie met CVE-2026-81573. Ook ontbreekt er correcte bounds checking op de data length in opcode 0x5e requests, wat een segmentation fault kan veroorzaken en de stabiliteit van de servercomponent kan beïnvloeden. Ten slotte wordt een zwakke SID gebruikt voor authenticatie, waardoor brute-force aanvallen mogelijk zijn om toegang te krijgen tot sessiehandles en daarmee tot licentie-informatie van andere sessies.

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
Fixed
Sentio Creator 2026.3
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
No verified workaround is recorded. If business-safe, reduce exposure to the affected interface and allow only trusted sources until authoritative guidance is available.
04

Evidence and provenance

Published 27 Aug 2026 · Last source change 27 Aug 2026, 13:33 UTC · CWE-284 · Improper Access Control

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-27
European sourceENISA EUVD · EUVD-2026-66980
Product sourceVendor CSAF · SICK PSIRT
Remediation sourceVendor CSAF · SICK PSIRT
CWE sourceCNA
NVD statusNVD awaiting enrichment

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. Affected versionsThe structured affected or fixed version information changed.
    Before
    SICK Sentio Creator all versions; SICK APU0G00 with Image Version 1.0.0.7 and Image ID 30; SICK APU0G00 with Image Version 1.0.0.2 and Image ID 38; SICK APU0G50 with Image Version 1.0.0.2 and Image ID 38; SICK APU0G50 with Image Version 1.0.0.1 and Image ID 45; SICK APU0G03 with Image Version 1.0.0.1 and Image ID 41; SICK APU0G03 with Image Version 1.0.0.2 and Image ID 36; SICK APU3F00 with Image Version 1.0.0.0 and Image ID 27; SICK APU3F00 with Image Version 1.0.0.0 and Image ID 46; SICK APU4600 with Image Version 1.1.0.1 and Image ID 18; SICK APU8G00 with Image Version 1.0.0.11 and Image ID 15; SICK APU8G00 with Image Version 1.0.0.2 and Image ID 44; SICK APU8G20 with Image Version 1.0.0.2 and Image ID 29; SICK APU8G20 with Image Version 1.0.0.2 and Image ID 32
    After
    Sentio Creator < 2026.3; SICK CODE-LOC all versions; SICK LiDAR-LOC all versions; SICK APU0G00 with Image Version 1.0.0.7 and Image ID 30; SICK APU0G00 with Image Version 1.0.0.2 and Image ID 38; SICK APU0G50 with Image Version 1.0.0.2 and Image ID 38; SICK APU0G50 with Image Version 1.0.0.1 and Image ID 45; SICK APU0G03 with Image Version 1.0.0.1 and Image ID 41; SICK APU0G03 with Image Version 1.0.0.2 and Image ID 36; SICK APU3F00 with Image Version 1.0.0.0 and Image ID 27; SICK APU3F00 with Image Version 1.0.0.0 and Image ID 46; SICK APU4600 with Image Version 1.1.0.1 and Image ID 18; SICK APU8G00 with Image Version 1.0.0.11 and Image ID 15; SICK APU8G00 with Image Version 1.0.0.2 and Image ID 44; SICK APU8G20 with Image Version 1.0.0.2 and Image ID 29; SICK APU8G20 with Image Version 1.0.0.2 and Image ID 32; SICK SIM1200-2A1A130 LiDAR-LOC with all firmware versions · Fixed: Sentio Creator 2026.3
    SICK PSIRT ↗
  2. Affected versionsThe structured affected or fixed version information changed.
    Before
    9.00 < 9.10; 8.00 < 8.41a; 7.x; 6.x · Fixed: No fixed version is explicitly recorded in the structured CVE data.
    After
    9.00 < 9.10; 8.00 < 8.41a; 7.x; 6.x · Fixed: The problem is corrected by Wibu in the following product versions: - CodeMeter Runtime 8.41a - CodeMeter Runtime 9.10 ABB recommends that customers apply the update at their earliest convenience and install the version compatible with their operating system. Both versions are available for download from the Wibu download site and can be updated independent of the tool installation: https://www.wibu.com/support/user/user-software.html. An updated version of CodeMeter Runtime containing the fixes will be integrated into the following tool versions: - AC 800PEC: Version 5.4.5.2 - AC 800PEC ARM: Version 3.0.0.0 (Expected by Q1 2027) - AC 800PEC Tool: Not planned, in classic lifecycle phase - AC 800PEC Tool Cheetah: Version 3.0.0.0 (Expected by Q1 2027) - Control Terminal (xCT): Not planned, in classic lifecycle phase
    ABB Product Security Incident Response Team (PSIRT) ↗
  3. Remediation statusRemediation status changed from Awaiting fix to Patch available.
    Before
    Awaiting fix
    After
    Patch available
    ABB Product Security Incident Response Team (PSIRT) ↗
  4. ENISA EUVD mappingEUVD-2026-66980 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-66980"}
    ENISA EUVD ↗
  5. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release recorded from official guidance
ENISA EUVD · EUVD-2026-66980↗Vendor CSAF · SICK PSIRT↗ABB Product Security Incident Response Team (PSIRT) security advisory↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-81573 · cve.blacktree.nl