BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-74639High confidence

ALSA: us144mkii: re-anchor capture URBs on resubmission

Linux · Linux

…UnscoredAssess manually
Recommended action
Patch only the product branches with a verified fix

No CVSS base score is available from the CNA, CISA ADP or NIST. Absence of a score is not evidence of low risk; review the vendor advisory, affected exposure and exploit evidence. Verified remediation exists for at least one product or source, but 197 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityUnscoredOperational priority:Needs assessment, manual assessment needed.unscored

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.21% for the current model date.

Compensating controls

  • Apply the linked authoritative mitigation while planning the permanent fix.
  • Restrict local access and enforce least privilege on affected hosts.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs Linux Linux and falls inside the recorded affected range.
  2. Recheck the vendor advisory before scheduling a change because no verified fixed version is currently retained.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Manual assessmentRemediation target: Manual assessment

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 197 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Distribution package intelligence

Release-specific package status

Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.

17 package states
Package result overrides the generic status

BlackTree has verified remediation for at least one product or source, but the relevant distribution still reports no fixed package for 13 affected package states shown here. Treat those rows as affected with no fix until that distribution publishes a fixed version.

Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Distribution releaseSource packageVendor stateFixed versionEvidence
Debian trixietrixie · sourcelinuxNot affectedDebian marks this release not affected (fixed-version marker 0).Not published in this feedDebian Security Tracker ↗Source updated 6 Oct 2026
Debian bookwormbookworm · sourcelinuxNot affectedDebian marks this release not affected (fixed-version marker 0).Not published in this feedDebian Security Tracker ↗Source updated 6 Oct 2026
Debian forkyforky · sourcelinuxVendor fix publishedDebian records a fixed source-package version for this release.7.1.9-1Debian Security Tracker ↗Source updated 6 Oct 2026
Debian sidsid · sourcelinuxVendor fix publishedDebian records a fixed source-package version for this release.7.1.9-1Debian Security Tracker ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-aws-6.14Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-fde-6.14Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-nvidia-6.14Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gcp-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-hwe-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-lowlatency-hwe-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidia-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-oem-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-oracle-6.14Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-raspi-realtimeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-realtimeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-riscvAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
CVE-2026-74639 · CSAF 2.0 · revision 3 · finalRed Hat Product Securitykernel: ALSA: us144mkii: re-anchor capture URBs on resubmission
184 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • kernel as a component of Red Hat Enterprise Linux 10
  • kernel-64k as a component of Red Hat Enterprise Linux 10
  • kernel-64k-core as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug-core as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug-devel as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug-devel-matched as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug-modules as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug-modules-core as a component of Red Hat Enterprise Linux 10
  • kernel-64k-debug-modules-extra as a component of Red Hat Enterprise Linux 10
  • kernel-64k-devel as a component of Red Hat Enterprise Linux 10
  • kernel-64k-devel-matched as a component of Red Hat Enterprise Linux 10
Summary
A flaw was found in the Linux kernel, specifically within the ALSA `us144mkii` driver. The `capture_urb_complete()` function resubmits capture Urban Request Blocks (URBs) without properly re-anchoring them. This oversight allows URBs to remain queued on the host controller even after their associated memory has been freed. A local attacker could exploit this use-after-free vulnerability by manipulating device-supplied data, potentially leading to arbitrary code execution or a denial of service.
Remediation
To mitigate this vulnerability, prevent the snd-usb-us144mkii kernel module from loading by blacklisting it. 1. Create a configuration file to prevent the module from loading: ``` echo "blacklist snd-usb-us144mkii" > /etc/modprobe.d/snd-usb-us144mkii.conf echo "install snd-usb-us144mkii /bin/true" >> /etc/modprobe.d/snd-usb-us144mkii.conf ``` 2. If the module is currently loaded, unload it: ``` modprobe -r snd-usb-us144mkii ``` Caveats: Disabling this module prevents the system from recognizing and using TASCAM US-144MKII audio hardware. If the driver is actively in use by running processes, a system reboot may be required to ensure the module is fully unloaded and cannot be reloaded.
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-64576

No EUVD known-exploited evidence

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
0.0
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

No CVSS base score is available from the CNA, CISA ADP or NIST. Absence of a score is not evidence of low risk; review the vendor advisory, affected exposure and exploit evidence. Verified remediation exists for at least one product or source, but 197 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

What

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

Why

The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.

How

An attacker operating through the affected interface may attempt exploitation when the stated preconditions are met. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

Why

The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.

How

An attacker operating through the affected interface may attempt exploitation when the stated preconditions are met. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
the affected interface → vulnerable operation → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Unspecified
Privileges required
Not stated in the selected CVSS metric
User interaction
Not stated in the selected CVSS metric
Attack complexity
Not stated in the selected CVSS metric
Security boundary
Not stated in the selected CVSS metric
Weakness
?CWE means Common Weakness Enumeration.
CWE not yet assigned
CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
Not available from the selected scoring authority.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-64576Official EUVD mapping

In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>

Official EUVD record ↗
BSI · German · WID-SEC-2026-2970Linux Kernel: Mehrere Schwachstellen ermöglichen nicht spezifizierten Angriff

Ein Angreifer kann mehrere Schwachstellen im Linux Kernel ausnutzen, um einen nicht näher spezifizierten Angriff durchzuführen, möglicherweise Sicherheitsmaßnahmen zu umgehen, einen Denial-of-Service-Zustand herbeizuführen oder vertrauliche Informationen offenzulegen.

Official advisory ↗
Cyber Security Agency of Singapore · English · CSA-SB-20260826Security Bulletin 26 Aug 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 26 Aug 2026, published on 26 August 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
Fixed
No fixed version is explicitly recorded in the structured CVE data.
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
To mitigate this vulnerability, prevent the snd-usb-us144mkii kernel module from loading by blacklisting it. 1. Create a configuration file to prevent the module from loading: ``` echo "blacklist snd-usb-us144mkii" > /etc/modprobe.d/snd-usb-us144mkii.conf echo "install snd-usb-us144mkii /bin/true" >> /etc/modprobe.d/snd-usb-us144mkii.conf ``` 2. If the module is currently loaded, unload it: ``` modprobe -r snd-usb-us144mkii ``` Caveats: Disabling this module prevents the system from recognizing and using TASCAM US-144MKII audio hardware. If the driver is actively in use by running processes, a system reboot may be required to ensure the module is fully unloaded and cannot be reloaded.
04

Evidence and provenance

Published 22 Aug 2026 · Last source change 22 Aug 2026, 15:32 UTC · CWE not yet assigned

CVE recordCVE.org · 5.2
CVSS sourceUnavailable
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-23
European sourceENISA EUVD · EUVD-2026-64576
Product sourceVendor CSAF · Red Hat Product Security
Remediation sourceVendor CSAF · Red Hat Product Security
CWE sourceUnavailable
NVD statusNVD received

Missing structured fields: CVSS base score, CWE classification. Missing data is not evidence of low risk; review the primary advisory.

Material change intelligence

What changed after publication

View recent updates ↗
  1. Vendor guidanceAuthoritative vendor guidance changed from remediation: access.redhat.com/CVE-2026-74639 to remediation: access.redhat.com/CVE-2026-74639.
    Before
    remediation: access.redhat.com/CVE-2026-74639
    After
    remediation: access.redhat.com/CVE-2026-74639
    Red Hat Product Security ↗
  2. Remediation statusRemediation status changed from Awaiting fix to Mitigation available.
    Before
    Awaiting fix
    After
    Mitigation available
    Red Hat Product Security ↗
  3. ENISA EUVD mappingEUVD-2026-64576 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-64576"}
    ENISA EUVD ↗
  4. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
ENISA EUVD · EUVD-2026-64576↗Vendor CSAF · Red Hat Product Security↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-74639 · cve.blacktree.nl