BlackTreeIndependent security intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-72121High confidence

can: bcm: add locking when updating filter and timer values

Linux · Linux

8.8HighCVSS 3.1
Recommended action
Within 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available
Distribution package intelligence

Ubuntu vendor package status

Canonical’s release and source-package findings are shown separately from local repository availability.

20 package states
Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Ubuntu releaseSource packageVendor stateFixed versionEvidence
Ubuntu 24.04 LTSnoble · standard archivelinuxAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-awsAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azureAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-fdeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-nvidiaAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gcpAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gkeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gkeopAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-ibmAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-lowlatencyAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidiaAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidia-lowlatencyAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidia-tegraAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-oem-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-oracleAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-raspiAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-raspi-realtimeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-realtimeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-riscvAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-xilinxAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical record ↗Source updated 9 Sept 2026
Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
CVE-2026-72121 · CSAF 2.0 · revision 3 · finalRed Hat Product Securitykernel: can: bcm: add locking when updating filter and timer values
62 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • kernel as a component of Red Hat Enterprise Linux 6
  • kernel-abi-whitelists as a component of Red Hat Enterprise Linux 6
  • kernel-bootwrapper as a component of Red Hat Enterprise Linux 6
  • kernel-debug as a component of Red Hat Enterprise Linux 6
  • kernel-debug-devel as a component of Red Hat Enterprise Linux 6
  • kernel-devel as a component of Red Hat Enterprise Linux 6
  • kernel-doc as a component of Red Hat Enterprise Linux 6
  • kernel-firmware as a component of Red Hat Enterprise Linux 6
  • kernel-headers as a component of Red Hat Enterprise Linux 6
  • kernel-kdump as a component of Red Hat Enterprise Linux 6
  • kernel-kdump-devel as a component of Red Hat Enterprise Linux 6
  • kernel.src as a component of Red Hat Enterprise Linux 6
Summary
A flaw was found in the Linux kernel's Controller Area Network (CAN) Broadcom (bcm) driver. A race condition exists when the driver attempts to update filter and timer values simultaneously with ongoing receive operations. This can lead to the transmission of stale CAN reply frames with an incorrect Remote Transmission Request (RTR) flag set, potentially causing incorrect communication or unexpected behavior on the CAN bus.
Remediation
Fix deferred
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Select the national-authority views to include. The exact source language is shown on each matched advisory. Your choice is remembered on this device and encoded in the shareable URL.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-58879

No EUVD known-exploited evidence

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
8.8 · CVSS 3.1
Advisory evidence
No linked advisory details stored yet
Recommended actionWithin 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available
01

What, why and how

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

What

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

Why

The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

Why

The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
an adjacent network → vulnerable operation → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Adjacent
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Unchanged: impact remains within the vulnerable component's security authority
Weakness
?CWE means Common Weakness Enumeration.
CWE not yet assigned
CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.

AVAdjacentAttack vector: The attacker must be on an adjacent or logically close network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CHighConfidentiality impact: A successful attack can cause a major loss.IHighIntegrity impact: A successful attack can cause a major loss.AHighAvailability impact: A successful attack can cause a major loss.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
Unauthenticated
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-58879Official EUVD mapping

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

Official EUVD record
BSI · German · WID-SEC-W-2026-2852Linux Kernel: Mehrere Schwachstellen

Ein Angreifer kann mehrere Schwachstellen in Linux Kernel ausnutzen, um einen Denial of Service herbeizuführen oder einen nicht näher spezifizierten Angriff durchzuführen.

Official advisory
CERT-FR · French · CERTFR-2026-AVI-1069Multiples vulnérabilités dans le noyau Linux de Debian LTS

d?id=CVE-2026-72101 Référence CVE CVE-2026-72103 https://www.cve.org/CVERecord?id=CVE-2026-72103 Référence CVE CVE-2026-72113 https://www.cve.org/CVERecord?id=CVE-2026-72113 Référence CVE CVE-2026-72114 https://www.cve.org/CVERecord?id=CVE-2026-72114 Référence CVE CVE-2026-72115 https://www.cve.org/CVERecord?id=CVE-2026-72115 Référence CVE CVE-2026-72116 https://www.cve.org/CVERecord?id=CVE-2026-72116 Référence CVE CVE-2026-72117 https://www.cve.org/CVERecord?id=CVE-2026-72117 Référence CVE CVE-2026-72118 https://www.cve.org/CVERecord?id=CVE-2026-72118 Référence CVE CVE-2026-72119 https://www.cve.org/CVERecord?id=CVE-2026-72119 Référence CVE CVE-2026-72121 https://www.cve.org/CVERecord?id=CVE-2026-72121 Référence CVE CVE-2026-72124 https://www.cve.org/CVERecord?id=CVE-2026-72124 Référence CVE CVE-2026-72125 https://www.cve.org/CVERecord?id=CVE-2026-72125 Référence CVE CVE-2026-72130 https://www.cve.org/CVERecord?id=CVE-2026-72130 Référence CVE CVE-2026-72137 https://www.cve.org/CVERecord?id=CVE-2026-72137 Référence CVE CVE-2026-72142 https://www.cve.org/CVERecord?id=CVE-2026-72142 Référence CVE CVE-2026-72146 https://www.cve.org/CVERecord?id=CVE-2026-72146 Référence CVE CVE-2026-72147 https://www.cve.org/CVERecord?id=CVE-2026-72147 Référence CVE CVE-2026-72168 https://www.cve.org/CVERecord?id=

Official advisory
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Patch available
Affected
kernel as a component of Red Hat Enterprise Linux 6; kernel-abi-whitelists as a component of Red Hat Enterprise Linux 6; kernel-bootwrapper as a component of Red Hat Enterprise Linux 6; kernel-debug as a component of Red Hat Enterprise Linux 6; kernel-debug-devel as a component of Red Hat Enterprise Linux 6; kernel-devel as a component of Red Hat Enterprise Linux 6; kernel-doc as a component of Red Hat Enterprise Linux 6; kernel-firmware as a component of Red Hat Enterprise Linux 6; kernel-headers as a component of Red Hat Enterprise Linux 6; kernel-kdump as a component of Red Hat Enterprise Linux 6; kernel-kdump-devel as a component of Red Hat Enterprise Linux 6; kernel.src as a component of Red Hat Enterprise Linux 6; perf as a component of Red Hat Enterprise Linux 6; python-perf as a component of Red Hat Enterprise Linux 6; bpftool as a component of Red Hat Enterprise Linux 8; kernel as a component of Red Hat Enterprise Linux 8; kernel-abi-stablelists as a component of Red Hat Enterprise Linux 8; kernel-abi-whitelists as a component of Red Hat Enterprise Linux 8; kernel-core as a component of Red Hat Enterprise Linux 8; kernel-cross-headers as a component of Red Hat Enterprise Linux 8; kernel-debug as a component of Red Hat Enterprise Linux 8; kernel-debug-core as a component of Red Hat Enterprise Linux 8; kernel-debug-devel as a component of Red Hat Enterprise Linux 8; kernel-debug-modules as a component of Red Hat Enterprise Linux 8; kernel-debug-modules-extra as a component of Red Hat Enterprise Linux 8; kernel-debug-modules-internal as a component of Red Hat Enterprise Linux 8; kernel-devel as a component of Red Hat Enterprise Linux 8; kernel-doc as a component of Red Hat Enterprise Linux 8; kernel-headers as a component of Red Hat Enterprise Linux 8; kernel-ipaclones-internal as a component of Red Hat Enterprise Linux 8; and 32 more
Fixed
< 6.15; 5.10.265 ≤ 5.10.*; 5.15.216 ≤ 5.15.*; 6.1.183 ≤ 6.1.*; 6.6.148 ≤ 6.6.*; 6.12.101 ≤ 6.12.*; 6.18.42 ≤ 6.18.*; 7.1.5 ≤ 7.1.*
Action
Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 15 Aug 2026 · Last source change 19 Aug 2026, 16:36 UTC · CWE not yet assigned

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-23
European sourceENISA EUVD · EUVD-2026-58879
Product sourceVendor CSAF · Red Hat Product Security
Remediation sourceVendor CSAF · Red Hat Product Security
CWE sourceUnavailable
NVD statusNVD received

Missing structured fields: CWE classification. Missing data is not evidence of low risk; review the primary advisory.

Material change intelligence

What changed after publication

View recent updates →
  1. Vendor guidanceAuthoritative vendor guidance changed from authoritative remediation link to authoritative remediation link.
    Before
    authoritative remediation link
    After
    authoritative remediation link
    CNA ↗
  2. Affected versionsThe structured affected or fixed version information changed.
    Before
    76c84c3728178b2d38d5604e399dfe8b0752645e < a7eb6db1cd3f7b556a301dc1265945ad112089f7; cc55dd28c20a6611e30596019b3b2f636819a4c0 < 834cbca3b12e46887f7a9b35f1981a888360ea4c; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 19b1994069dd29478ba767de1f98f14a088198dc; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < fc9f5ee1b073bd233d9c604e338af4ebb42cbc33; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 749179c2e25b95d22499ed29096b3e02d6dfd2b4; 8f1c022541bf5a923c8d6fa483112c15250f30a4; 7595de7bc56e0e52b74e56c90f7e247bf626d628; fbd8fdc2b218e979cfe422b139b8f74c12419d1f · Fixed: < 6.15; 6.6.148 ≤ 6.6.*; 6.12.101 ≤ 6.12.*; 6.18.42 ≤ 6.18.*; 7.1.5 ≤ 7.1.*; 7.2 ≤ *
    After
    7595de7bc56e0e52b74e56c90f7e247bf626d628 < 96994180bd7b248b0cc698afe926e23fc1bda59b; fbd8fdc2b218e979cfe422b139b8f74c12419d1f < caa8704a7f3cb7806331596195385437126ecb3a; 2a437b86ac5a9893c902f30ef66815bf13587bf6 < a7c369e7da8203e2b5be12bbcac7b9ab2ed5b658; 76c84c3728178b2d38d5604e399dfe8b0752645e < a7eb6db1cd3f7b556a301dc1265945ad112089f7; cc55dd28c20a6611e30596019b3b2f636819a4c0 < 834cbca3b12e46887f7a9b35f1981a888360ea4c; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 19b1994069dd29478ba767de1f98f14a088198dc; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < fc9f5ee1b073bd233d9c604e338af4ebb42cbc33; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 749179c2e25b95d22499ed29096b3e02d6dfd2b4 · Fixed: < 6.15; 5.10.265 ≤ 5.10.*; 5.15.216 ≤ 5.15.*; 6.1.183 ≤ 6.1.*; 6.6.148 ≤ 6.6.*; 6.12.101 ≤ 6.12.*; 6.18.42 ≤ 6.18.*; 7.1.5 ≤ 7.1.*
    CNA ↗
  3. Affected versionsThe structured affected or fixed version information changed.
    Before
    76c84c3728178b2d38d5604e399dfe8b0752645e < a7eb6db1cd3f7b556a301dc1265945ad112089f7; cc55dd28c20a6611e30596019b3b2f636819a4c0 < 834cbca3b12e46887f7a9b35f1981a888360ea4c; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 19b1994069dd29478ba767de1f98f14a088198dc; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < fc9f5ee1b073bd233d9c604e338af4ebb42cbc33; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 749179c2e25b95d22499ed29096b3e02d6dfd2b4; 8f1c022541bf5a923c8d6fa483112c15250f30a4; 7595de7bc56e0e52b74e56c90f7e247bf626d628; fbd8fdc2b218e979cfe422b139b8f74c12419d1f · Fixed: < 6.15; 6.6.148 ≤ 6.6.*; 6.12.101 ≤ 6.12.*; 6.18.42 ≤ 6.18.*; 7.1.5 ≤ 7.1.*; 7.2-rc4 ≤ *
    After
    76c84c3728178b2d38d5604e399dfe8b0752645e < a7eb6db1cd3f7b556a301dc1265945ad112089f7; cc55dd28c20a6611e30596019b3b2f636819a4c0 < 834cbca3b12e46887f7a9b35f1981a888360ea4c; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 19b1994069dd29478ba767de1f98f14a088198dc; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < fc9f5ee1b073bd233d9c604e338af4ebb42cbc33; c2aba69d0c36a496ab4f2e81e9c2b271f2693fd7 < 749179c2e25b95d22499ed29096b3e02d6dfd2b4; 8f1c022541bf5a923c8d6fa483112c15250f30a4; 7595de7bc56e0e52b74e56c90f7e247bf626d628; fbd8fdc2b218e979cfe422b139b8f74c12419d1f · Fixed: < 6.15; 6.6.148 ≤ 6.6.*; 6.12.101 ≤ 6.12.*; 6.18.42 ≤ 6.18.*; 7.1.5 ≤ 7.1.*; 7.2 ≤ *
    CNA ↗
  4. SeveritySeverity changed from Unknown to High.
    Before
    Unknown
    After
    High
    CNA ↗
  5. CVSS scoreCVSS score changed from not recorded to 8.8 (CVSS 3.1 · CNA · CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).
    Before
    not recorded
    After
    8.8 (CVSS 3.1 · CNA · CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)
    CNA ↗
  6. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release or patch reference recorded
ENISA EUVD · EUVD-2026-58879↗Vendor CSAF · Red Hat Product Security↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-72121 · cve.blacktree.nl