BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-43118High confidence

btrfs: fix zero size inode with non-zero size after log replay

Linux · Linux

5.5MediumCVSS 3.1
Recommended action
Patch only the product branches with a verified fix

Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 22 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityMediumOperational priority:Low, lowered one band.downgradedsince 11 May 2026

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • Exploitation requires an existing local or physical foothold with privileges.
  • EPSS is 0.16% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict local access and enforce least privilege on affected hosts.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs Linux Linux and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: No default targetRemediation target: Normal maintenance

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 22 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Distribution package intelligence

Release-specific package status

Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.

24 package states
Package result overrides the generic status

BlackTree has verified remediation for at least one product or source, but the relevant distribution still reports no fixed package for 22 affected package states shown here. Treat those rows as affected with no fix until that distribution publishes a fixed version.

Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Distribution releaseSource packageVendor stateFixed versionEvidence
Debian trixietrixie · sourcelinuxAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 6 Oct 2026
Debian bookwormbookworm · sourcelinuxAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 6 Oct 2026
Debian forkyforky · sourcelinuxVendor fix publishedDebian records a fixed source-package version for this release.6.19.14-1Debian Security Tracker ↗Source updated 6 Oct 2026
Debian sidsid · sourcelinuxVendor fix publishedDebian records a fixed source-package version for this release.6.19.14-1Debian Security Tracker ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinuxAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-awsAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azureAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-fdeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-azure-nvidiaAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gcpAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gkeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-gkeopAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-ibmAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-lowlatencyAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidiaAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidia-lowlatencyAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-nvidia-tegraAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-oem-6.11Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-oracleAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-raspiAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-raspi-realtimeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-realtimeAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-riscvAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archivelinux-xilinxAffected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.Not published in this feedCanonical Ubuntu Security ↗Source updated 6 Oct 2026
Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
CVE-2026-43118 · CSAF 2.0 · revision 12 · interimSUSE Product Security TeamCVE-2026-43118
211 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • cluster-md-kmp-default as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • dlm-kmp-default as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • gfs2-kmp-default as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-default as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-default-base as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-default-devel as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-default-man as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-devel as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-macros as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-source as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • ocfs2-kmp-default as component of SUSE Linux Enterprise High Performance Computing 12 SP5
  • kernel-default as component of SUSE Linux Enterprise High Performance Computing 15 SP4-LTSS
Summary
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.
Remediation
To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or "zypper patch".
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-27645

No EUVD known-exploited evidence

ENISA has published the identifier mapping but no EUVD description has been stored yet.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
Not supplied in the stored EUVD record
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 22 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.

What

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.

Why

The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.

How

An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.

Why

The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.

How

An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
local access → vulnerable operation → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Local
Privileges required
Low: a basic authenticated account is required
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Unchanged: impact remains within the vulnerable component's security authority
Weakness
?CWE means Common Weakness Enumeration.
CWE not yet assigned
CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.

AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRLowPrivileges required: The attacker needs basic user-level privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CNoneConfidentiality impact: No direct loss is represented by this metric.INoneIntegrity impact: No direct loss is represented by this metric.AHighAvailability impact: A successful attack can cause a major loss.
Post-exploitation / living off the land
The issue can support a local privilege or sandbox boundary transition; normal system utilities may then be available in the gained context.
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

BSI · German · WID-SEC-2026-1385Linux Kernel: Mehrere Schwachstellen

Ein lokaler Angreifer kann mehrere Schwachstellen im Linux Kernel ausnutzen, um einen Denial of Service zu verursachen, Informationen offenzulegen, Sicherheitsmaßnahmen zu umgehen oder potentiell beliebigen Programmcode auszuführen.

Official advisory ↗
CERT-FR · French · CERTFR-2026-AVI-1064Multiples vulnérabilités dans le noyau Linux de SUSE

d?id=CVE-2026-43098 Référence CVE CVE-2026-43104 https://www.cve.org/CVERecord?id=CVE-2026-43104 Référence CVE CVE-2026-43105 https://www.cve.org/CVERecord?id=CVE-2026-43105 Référence CVE CVE-2026-43108 https://www.cve.org/CVERecord?id=CVE-2026-43108 Référence CVE CVE-2026-43110 https://www.cve.org/CVERecord?id=CVE-2026-43110 Référence CVE CVE-2026-43111 https://www.cve.org/CVERecord?id=CVE-2026-43111 Référence CVE CVE-2026-43113 https://www.cve.org/CVERecord?id=CVE-2026-43113 Référence CVE CVE-2026-43114 https://www.cve.org/CVERecord?id=CVE-2026-43114 Référence CVE CVE-2026-43117 https://www.cve.org/CVERecord?id=CVE-2026-43117 Référence CVE CVE-2026-43118 https://www.cve.org/CVERecord?id=CVE-2026-43118 Référence CVE CVE-2026-43120 https://www.cve.org/CVERecord?id=CVE-2026-43120 Référence CVE CVE-2026-43123 https://www.cve.org/CVERecord?id=CVE-2026-43123 Référence CVE CVE-2026-43126 https://www.cve.org/CVERecord?id=CVE-2026-43126 Référence CVE CVE-2026-43129 https://www.cve.org/CVERecord?id=CVE-2026-43129 Référence CVE CVE-2026-43133 https://www.cve.org/CVERecord?id=CVE-2026-43133 Référence CVE CVE-2026-43134 https://www.cve.org/CVERecord?id=CVE-2026-43134 Référence CVE CVE-2026-43135 https://www.cve.org/CVERecord?id=CVE-2026-43135 Référence CVE CVE-2026-43136 https://www.cve.org/CVERecord?id=

Official advisory ↗
CERT-FR · French · CERTFR-2026-AVI-0927Multiples vulnérabilités dans le noyau Linux de SUSE

d?id=CVE-2026-43098 Référence CVE CVE-2026-43101 https://www.cve.org/CVERecord?id=CVE-2026-43101 Référence CVE CVE-2026-43104 https://www.cve.org/CVERecord?id=CVE-2026-43104 Référence CVE CVE-2026-43105 https://www.cve.org/CVERecord?id=CVE-2026-43105 Référence CVE CVE-2026-43107 https://www.cve.org/CVERecord?id=CVE-2026-43107 Référence CVE CVE-2026-43109 https://www.cve.org/CVERecord?id=CVE-2026-43109 Référence CVE CVE-2026-43111 https://www.cve.org/CVERecord?id=CVE-2026-43111 Référence CVE CVE-2026-43113 https://www.cve.org/CVERecord?id=CVE-2026-43113 Référence CVE CVE-2026-43117 https://www.cve.org/CVERecord?id=CVE-2026-43117 Référence CVE CVE-2026-43118 https://www.cve.org/CVERecord?id=CVE-2026-43118 Référence CVE CVE-2026-43119 https://www.cve.org/CVERecord?id=CVE-2026-43119 Référence CVE CVE-2026-43120 https://www.cve.org/CVERecord?id=CVE-2026-43120 Référence CVE CVE-2026-43123 https://www.cve.org/CVERecord?id=CVE-2026-43123 Référence CVE CVE-2026-43124 https://www.cve.org/CVERecord?id=CVE-2026-43124 Référence CVE CVE-2026-43128 https://www.cve.org/CVERecord?id=CVE-2026-43128 Référence CVE CVE-2026-43129 https://www.cve.org/CVERecord?id=CVE-2026-43129 Référence CVE CVE-2026-43130 https://www.cve.org/CVERecord?id=CVE-2026-43130 Référence CVE CVE-2026-43132 https://www.cve.org/CVERecord?id=

Official advisory ↗
JVN iPedia · Japanese · JVNDB-2026-014963LinuxのLinux Kernelにおける不特定の脆弱性

Linuxカーネルにおいて、以下の脆弱性が修正されました。btrfsにおいて、ログ再生後にサイズが非ゼロであるにもかかわらず、ゼロサイズのinodeが設定される問題が修正されました。新しい名前のログ記録やディレクトリの新しいエントリのログ記録の一部としてinodeの存在をログ記録する際、ログされたinodeアイテムの世代は常に0に設定されます。これはログ再生時（overwrite_item()内）に、inodeが存在することだけをログしているためにi_sizeを設定すべきではなく、サブボリュームツリー内のinodeのi_sizeを保持する必要があることを示しています（新しい名前やinodeの存在だけをログするときはextentsはログしません）。しかしこれは、すでにフルモードでinodeがログされた場合や、過去のトランザクションで作成されたinodeを初めてログするときに、そのinodeの新しいi_sizeが0になる点に問題があります。新しい名前のログ（新しいハードリンクやリネームによる）を行うと、inodeのi_sizeが0かつ世代が0としてログされ、この場合ログ再生コードはinodeのi_sizeを0に更新しない（overwrite_item()内）という問題が発生します。具体的なシナリオ例は以下の通りです。mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir 電源断。ログ再生後、ファイルのサイズは64Kのまま残ります。これは最初にinodeをログするとき、fooファイルをfsyncした際に現在のi_sizeである0をログし、その後ハードリンクを作成するとinodeを存在モード（LOG_INODE_EXISTS）で再度ログしますが、ログツリーに追加するinodeアイテムの世代を0に設定しているため、ログ再生中にoverwrite_item()は世代とi_sizeの両方が0であることを検出し、inodeのi_sizeを64Kから0に更新する処理をスキップするためです。修正はfill_inode_item()において、現在のトランザクションでログしたi_sizeとともに実際のinodeの世代を常にログするようにし、過去のトランザクションで作成されたinodeが存在モードのみでログされた場合でも、コミットルートから取得したinodeアイテムのi_sizeをログすることで、複数回inodeの存在をログしても正しいi_sizeを得られるようにしました。fstests用のテストケースは近日中に提供される予定です。

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
Fixed
Linux: < 2.6.30, 6.18.24 ≤ 6.18.*, 6.19.14 ≤ 6.19.*, 7.0 ≤ *
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 6 May 2026 · Last source change 11 May 2026, 22:18 UTC · CWE not yet assigned

CVE recordCVE.org · 5.2
CVSS sourceNIST NVD
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-14
European sourceENISA EUVD · EUVD-2026-27645
Product sourceVendor CSAF · SUSE Product Security Team
Remediation sourceVendor CSAF · SUSE Product Security Team
CWE sourceUnavailable
NVD statusNVD enriched

Missing structured fields: CWE classification. Missing data is not evidence of low risk; review the primary advisory.

Material change intelligence

What changed after publication

View recent updates ↗

No material field changes have been recorded since change tracking began. Routine source refreshes and cosmetic edits are intentionally excluded.

Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release or patch reference recorded
ENISA EUVD · EUVD-2026-27645↗Vendor CSAF · SUSE Product Security Team↗CVE authority or vendor reference↗Patch or update reference↗Patch or update reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-43118 · cve.blacktree.nl