BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-34988High confidence

Wasmtime leaks data between pooling allocator instances

bytecodealliance · wasmtime

Official source article: GitHub GHSA-6WGR-89RJ-399P ↗. Check the applicable product and release in the original source.

2.3LowCVSS 4.0
Recommended action
Patch only the product branches with a verified fix

Low technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityLowOperational priority:Low, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.30% for the current model date.

Compensating controls

  • Apply the linked authoritative mitigation while planning the permanent fix.
  • Restrict the affected network interface to trusted sources where business-safe.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs bytecodealliance wasmtime and falls inside the recorded affected range.
  2. Recheck the vendor advisory before scheduling a change because no verified fixed version is currently retained.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: No default targetRemediation target: Normal maintenance

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Cross-source reconciliation

Remediation availability differs by product scope

Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Distribution package intelligence

Release-specific package status

Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.

4 package states
Package result overrides the generic status

BlackTree has verified remediation for at least one product or source, but the relevant distribution still reports no fixed package for 1 affected package state shown here. Treat those rows as affected with no fix until that distribution publishes a fixed version.

Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Distribution releaseSource packageVendor stateFixed versionEvidence
Debian trixietrixie · sourcerust-wasmtimeAffected, no fix publishedDebian currently tracks this release as open.Not published in this feedDebian Security Tracker ↗Source updated 6 Oct 2026
Debian forkyforky · sourcerust-wasmtimeVendor fix publishedDebian records a fixed source-package version for this release.36.0.7+dfsg-1Debian Security Tracker ↗Source updated 6 Oct 2026
Debian sidsid · sourcerust-wasmtimeVendor fix publishedDebian records a fixed source-package version for this release.36.0.7+dfsg-1Debian Security Tracker ↗Source updated 6 Oct 2026
Ubuntu 24.04 LTSnoble · standard archiverust-wasmtimeUnder evaluationCanonical reports that the package might be affected and still needs evaluation or fixing.Not published in this feedCanonical Ubuntu Security ↗Source updated 5 Oct 2026
Open-source package ranges3 source-attributed ranges

These OSV and GitHub advisory ranges apply only to the named package and ecosystem. A listed fixed version is not a universal product patch or proof that an update is installed.

Ecosystem and packageAffected rangeFirst fixed versionEvidence
rustwasmtime>= 28.0.0, < 36.0.736.0.7GitHub advisory ↗upstream repository advisory · 10 Apr 2026
rustwasmtime>= 37.0.0, < 42.0.242.0.2GitHub advisory ↗upstream repository advisory · 10 Apr 2026
rustwasmtime= 43.0.043.0.1GitHub advisory ↗upstream repository advisory · 10 Apr 2026
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-21033

No EUVD known-exploited evidence

ENISA has published the identifier mapping but no EUVD description has been stored yet.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
Not supplied in the stored EUVD record
Advisory evidence
No linked advisory details stored yet
Recommended actionPatch only the product branches with a verified fix

Low technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.

Fix availability varies by product
01

What, why and how

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

What

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Why

The product performs operations on a memory buffer, but it reads from or writes to a memory location outside the buffer's intended boundary. This may result in read or write operations on unexpected memory locations that could be linked to other variables, data structures, or internal program data.

How

An attacker operating through a network path may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.

Why

The product performs operations on a memory buffer, but it reads from or writes to a memory location outside the buffer's intended boundary. This may result in read or write operations on unexpected memory locations that could be linked to other variables, data structures, or internal program data.

How

An attacker operating through a network path may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
a network path → Improper Restriction of Operations within the Bounds of a Memory Buffer → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Network
Privileges required
Low: a basic authenticated account is required
User interaction
None
Attack complexity
High: exploitation depends on specific conditions
Security boundary
Not a CVSS 4.0 base metric
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-119 ↗

CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer. The product performs operations on a memory buffer, but it reads from or writes to a memory location outside the buffer's intended boundary. This may result in read or write operations on unexpected memory locations that could be linked to other variables, data structures, or internal program data.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:4.0/AV:N/AC:H/AT:P/PR:L/UI:N/VC:L/VI:N/VA:N/SC:L/SI:N/SA:N

Common Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.

AVNetworkAttack vector: The vulnerable component can be reached over a network.ACHighAttack complexity: Successful exploitation depends on specific conditions outside the attacker's direct control.ATPresentAttack requirements: A particular deployment or execution condition must be present.PRLowPrivileges required: The attacker needs basic user-level privileges.UINoneUser interaction: No action by another user is required.VCLowVulnerable-system confidentiality: A successful attack can cause a limited loss.VINoneVulnerable-system integrity: No direct loss is represented by this metric.VANoneVulnerable-system availability: No direct loss is represented by this metric.SCLowSubsequent-system confidentiality: A successful attack can cause a limited loss.SINoneSubsequent-system integrity: No direct loss is represented by this metric.SANoneSubsequent-system availability: No direct loss is represented by this metric.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
NetworkCWE-119
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

Cyber Security Agency of Singapore · English · CSA-SB-20260415Security Bulletin 15 April 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 15 April 2026, published on 15 April 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
JVN iPedia · Japanese · JVNDB-2026-011351Bytecode Allianceのwasmtimeにおけるバッファエラーの脆弱性

WasmtimeはWebAssemblyのランタイムです。バージョン28.0.0から36.0.7未満、42.0.2未満、および43.0.1未満において、Wasmtimeのプーリングアロケータの実装にバグがあり、特定の構成で線形メモリの内容があるインスタンスから次のインスタンスへ漏洩する可能性があります。線形メモリの仮想メモリ権限をリセットする実装は、リセットが必要かどうかを判断するために誤った述語を使用しており、一方でコンパイルプロセスは異なる述語を使用していました。この不一致により、プーリングアロケータは実行時に仮想メモリ権限のリセットは不要だと誤って判断し、コンパイル時には仮想メモリが信頼できると判断しました。脆弱性を悪用するには、プーリングアロケータが使用されていること、Config::memory_guard_size構成オプションが0であること、Config::memory_reservation構成が4GiB未満であること、かつプーリングアロケータがmax_memory_sizeをmemory_reservation値と同じに設定している必要があります。これらすべての条件が当てはまる場合、線形メモリが再利用される際に前のイテレーションのVM権限がリセットされません。つまり、境界外アクセスでセグメンテーションフォルトが発生すると想定されたコンパイル済みコードが実際にはセグメンテーションフォルトを起こさず、以前にマップされていた線形メモリの内容を読み取ることが可能になります。これはゲストWebAssemblyインスタンス間のデータ漏洩の脆弱性を意味し、WebAssemblyのセマンティクスおよびWasmtimeが提供するサンドボックスの安全性を破壊します。Wasmtimeはデフォルト設定およびプーリングアロケータのデフォルト設定ではこの問題に対して脆弱ではありませんが、埋め込み環境では設定を変更することでこの脆弱性が発生する可能性があります。この脆弱性は36.0.7、42.0.2、および43.0.1のバージョンで修正されています。

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Fix availability varies by product
Affected
wasmtime: >= 28.0.0, < 36.0.7, >= 37.0.0, < 42.0.2, >= 43.0.0, < 44.0.1
Fixed
No fixed version is explicitly recorded in the structured CVE data.
Action
Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
Workaround
A mitigation or workaround reference is available from the source linked below; validate it against the affected product and version.
04

Evidence and provenance

Published 9 Apr 2026 · Last source change 9 Apr 2026, 19:31 UTC · CWE-119 · Improper Restriction of Operations within the Bounds of a Memory Buffer

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-14
European sourceENISA EUVD · EUVD-2026-21033
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD enriched

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗

No material field changes have been recorded since change tracking began. Routine source refreshes and cosmetic edits are intentionally excluded.

Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-34988 · cve.blacktree.nl