Evidence used
- No CISA KEV confirmation is currently recorded.
- Exploitation requires an existing local or physical foothold with privileges.
- EPSS is 0.12% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2026
CVE-2026-23287High confidence
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
Linux · Linux
Official source article: Siemens SSA-019113 ↗. Check the applicable product and release in the original source.
5.5MediumCVSS 3.1
Patch only the product branches with a verified fix
Fix availability varies by productMedium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 30 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityMedium→Operational priority:Low, lowered one band.downgradedsince 8 Sep 2026
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict local access and enforce least privilege on affected hosts.
- Monitor vendor guidance and exploitation sources for a material change.
Verification
- Confirm that the asset runs Linux Linux and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Remediation availability differs by product scope
Verified remediation exists for at least one product or source, but 30 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
- Siemens ProductCERT: 5 affected or under-investigation product states without a fixed product state in the same current advisory
- Siemens ProductCERT: 5 affected or under-investigation product states without a fixed product state in the same current advisory
- Canonical Ubuntu Security: 20 affected package states with no published fix
Distribution package intelligence
24 package statesRelease-specific package status
Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.
Package result overrides the generic status
BlackTree has verified remediation for at least one product or source, but the relevant distribution still reports no fixed package for 20 affected package states shown here. Treat those rows as affected with no fix until that distribution publishes a fixed version.
Repository candidate not checked
A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.
| Distribution release | Source package | Vendor state | Fixed version | Evidence |
|---|---|---|---|---|
| Debian trixietrixie · source | linux | Vendor fix publishedDebian records a fixed source-package version for this release. | 6.12.85-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian bookwormbookworm · source | linux | Vendor fix publishedDebian records a fixed source-package version for this release. | 6.1.170-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian forkyforky · source | linux | Vendor fix publishedDebian records a fixed source-package version for this release. | 6.19.8-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian sidsid · source | linux | Vendor fix publishedDebian records a fixed source-package version for this release. | 6.19.8-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-aws | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-azure | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-azure-fde | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-azure-nvidia | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-gcp | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-gke | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-gkeop | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-ibm | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-lowlatency | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-nvidia | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-nvidia-lowlatency | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-nvidia-tegra | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-oem-6.11 | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-oracle | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-raspi | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-raspi-realtime | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-realtime | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-riscv | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | linux-xilinx | Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition. | Not published in this feed | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
Direct vendor intelligence
2 currentAuthoritative vendor CSAF and VEX advisories
Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.
SSA-019113 · CSAF 2.0 · revision 2 · interimSiemens ProductCERTSSA-019113: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.6
The vendor explicitly identifies these products as affected by this CVE.
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= V3.1.6
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= V3.1.6
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= V3.1.6
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= V3.1.6
- SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= V3.1.6
- Summary
- In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
- Remediation
- Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
SSA-082556 · CSAF 2.0 · revision 7 · interimSiemens ProductCERTSSA-082556: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.5
The vendor explicitly identifies these products as affected by this CVE.
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= V3.1.5
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= V3.1.5
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= V3.1.5
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= V3.1.5
- SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= V3.1.5
- Summary
- In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
- Remediation
- Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 30 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
Fix availability varies by product01
What, why and how
In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
What
In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
Why
The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.
How
An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.
What
In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
Why
The current structured CVE record identifies a security weakness, but the root cause requires confirmation in the linked vendor material.
How
An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material None recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.
- Likely attack path
- local access → vulnerable operation → cause the confidentiality, integrity or availability impact described by the vendor
- Attack surface
- Local
- Privileges required
- Low: a basic authenticated account is required
- User interaction
- None
- Attack complexity
- Low: no specialised conditions are recorded
- Security boundary
- Unchanged: impact remains within the vulnerable component's security authority
- Weakness
?
CWE means Common Weakness Enumeration. - CWE not yet assigned
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:HCommon Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRLowPrivileges required: The attacker needs basic user-level privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CNoneConfidentiality impact: No direct loss is represented by this metric.INoneIntegrity impact: No direct loss is represented by this metric.AHighAvailability impact: A successful attack can cause a major loss.- Post-exploitation / living off the land
- The issue can support a local privilege or sandbox boundary transition; normal system utilities may then be available in the gained context.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Fix availability varies by product
- Affected
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= V3.1.6
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= V3.1.6
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= V3.1.6
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= V3.1.6
- SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= V3.1.6
- Action
- Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
- Workaround
- Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
04
Evidence and provenance
Published 25 Mar 2026 · Last source change 8 Sept 2026, 08:45 UTC · CWE not yet assigned
CVE recordCVE.org · 5.2
CVSS sourceNIST NVD
EPSS source FIRST · tracked since 2026-08-14
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2026-15215
Product sourceVendor CSAF · Siemens ProductCERT
Remediation sourceVendor CSAF · Siemens ProductCERT
CWE sourceUnavailable
NVD statusNVD modified after enrichment
Missing structured fields: CWE classification. Missing data is not evidence of low risk; review the primary advisory.
Material change intelligence
View recent updates ↗What changed after publication
- Affected versionsThe structured affected or fixed version information changed.CNA ↗
- Before
- cc9f04f9a84f745949e325661550ed14bd0ff322 < 8942fb1a5bc2dcbd88f7e656d109d42f778f298f; cc9f04f9a84f745949e325661550ed14bd0ff322 < 2edbd173309165d103be6c73bd83e459dc45ae7b; cc9f04f9a84f745949e325661550ed14bd0ff322 < 686eb378a4a51aa967e08337dd59daade16aec0f; cc9f04f9a84f745949e325661550ed14bd0ff322 < 1883332bf21feb8871af09daf604fc4836a76925; cc9f04f9a84f745949e325661550ed14bd0ff322 < f611791a927141d05d7030607dea6372311c1413; cc9f04f9a84f745949e325661550ed14bd0ff322 < 1072020685f4b81f6efad3b412cdae0bd62bb043; 5.1 · Fixed: < 5.1; 6.1.167 ≤ 6.1.*; 6.6.130 ≤ 6.6.*; 6.12.77 ≤ 6.12.*; 6.18.17 ≤ 6.18.*; 6.19.7 ≤ 6.19.*; 7.0 ≤ *
- After
- Linux: cc9f04f9a84f745949e325661550ed14bd0ff322 < 8942fb1a5bc2dcbd88f7e656d109d42f778f298f, cc9f04f9a84f745949e325661550ed14bd0ff322 < 2edbd173309165d103be6c73bd83e459dc45ae7b, cc9f04f9a84f745949e325661550ed14bd0ff322 < 686eb378a4a51aa967e08337dd59daade16aec0f, cc9f04f9a84f745949e325661550ed14bd0ff322 < 1883332bf21feb8871af09daf604fc4836a76925, cc9f04f9a84f745949e325661550ed14bd0ff322 < f611791a927141d05d7030607dea6372311c1413, cc9f04f9a84f745949e325661550ed14bd0ff322 < 1072020685f4b81f6efad3b412cdae0bd62bb043, 5.1 · Fixed: Linux: < 5.1, 6.1.167 ≤ 6.1.*, 6.6.130 ≤ 6.6.*, 6.12.77 ≤ 6.12.*, 6.18.17 ≤ 6.18.*, 6.19.7 ≤ 6.19.*, 7.0 ≤ *
CVE published
Fixed release or patch reference recorded
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.