BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-17050High confidence

Double free of the USB host configuration descriptor when device enumeration fails

zephyrproject · zephyr

5.7MediumCVSS 3.1
Recommended action
Scheduled

Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority.

Patch available
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityMediumOperational priority:Medium, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.16% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict local access and enforce least privilege on affected hosts.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs zephyrproject zephyr and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: As exposure requiresRemediation target: Within 365 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-84012

No EUVD known-exploited evidence

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
5.7 · CVSS 3.1
Advisory evidence
No linked advisory details stored yet
Recommended actionScheduled

Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority.

Patch available
01

What, why and how

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

What

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

Why

The product calls free() twice on the same memory address.

How

An attacker operating through physical access may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.

What

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

Why

The product calls free() twice on the same memory address.

How

An attacker operating through physical access may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
physical access → Double Free → disrupt the affected service
Attack surface
Physical
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Unchanged: impact remains within the vulnerable component's security authority
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-415 ↗

CWE-415: Double Free. The product calls free() twice on the same memory address.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H

Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.

AVPhysicalAttack vector: The attacker needs physical access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CLowConfidentiality impact: A successful attack can cause a limited loss.ILowIntegrity impact: A successful attack can cause a limited loss.AHighAvailability impact: A successful attack can cause a major loss.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
UnauthenticatedDenial of serviceCWE-415
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2026-84012Official EUVD mapping

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

Official EUVD record ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Patch available
Affected
zephyr: 4.1.0 < 4.4.2
Fixed
An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
Action
Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 21 Sept 2026 · Last source change 21 Sept 2026, 18:49 UTC · CWE-415 · Double Free

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-09-22
European sourceENISA EUVD · EUVD-2026-84012
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD awaiting enrichment

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. ENISA EUVD mappingEUVD-2026-84012 was added to the official ENISA EUVD mapping for this CVE.
    Before
    not recorded
    After
    {"euvdId":"EUVD-2026-84012"}
    ENISA EUVD ↗
  2. Catalogue recordCVE added to the BlackTree catalogue.
    CNA ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
ENISA EUVD · EUVD-2026-84012↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-17050 · cve.blacktree.nl