Evidence used
- No CISA KEV confirmation is currently recorded.
- EPSS is 0.18% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2026
CVE-2026-13215High confidence
Zephyr ext2 mount: unvalidated superblock block size causes out-of-bounds write from a crafted filesystem image
zephyrproject · zephyr
6.8MediumCVSS 3.1
Scheduled
Patch availableMedium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityMedium→Operational priority:Medium, unchanged from published severity.unchanged
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict local access and enforce least privilege on affected hosts.
- Monitor vendor guidance and exploitation sources for a material change.
Verification
- Confirm that the asset runs zephyrproject zephyr and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority.
Patch available01
What, why and how
The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer.
What
The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer.
Why
A bounds error lets data be written beyond the intended memory region, potentially corrupting control data.
How
An attacker operating through physical access may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.
What
The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer.
Why
A bounds error lets data be written beyond the intended memory region, potentially corrupting control data.
How
An attacker operating through physical access may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material None recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.
- Likely attack path
- physical access → Out-of-bounds Write → disrupt the affected service
- Attack surface
- Physical
- Privileges required
- None: unauthenticated exploitation is possible
- User interaction
- None
- Attack complexity
- Low: no specialised conditions are recorded
- Security boundary
- Unchanged: impact remains within the vulnerable component's security authority
- Weakness
?
CWE means Common Weakness Enumeration: a standard category for the underlying weakness. - CWE-787 ↗
CWE-787: Out-of-bounds Write. The product writes data past the end, or before the beginning, of the intended buffer.
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:HCommon Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVPhysicalAttack vector: The attacker needs physical access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CHighConfidentiality impact: A successful attack can cause a major loss.IHighIntegrity impact: A successful attack can cause a major loss.AHighAvailability impact: A successful attack can cause a major loss.- Post-exploitation / living off the land
- No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Patch available
- Affected
- zephyr: 3.5.0 < 4.4.2
- Action
- Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
- Workaround
- No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04
Evidence and provenance
Published 25 Aug 2026 · Last source change 25 Aug 2026, 15:15 UTC · CWE-787 · Out-of-bounds Write
CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source FIRST · tracked since 2026-08-25
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2026-65292
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD awaiting enrichment
Core structured fields are present and their contributing authorities are shown above.
Material change intelligence
View recent updates ↗What changed after publication
- ENISA EUVD mappingEUVD-2026-65292 was added to the official ENISA EUVD mapping for this CVE.ENISA EUVD ↗
- Before
- not recorded
- After
- {"euvdId":"EUVD-2026-65292"}
- Affected versionsThe structured affected or fixed version information changed.CNA ↗
- Before
- 3.5.0 < 4.4.2 · Fixed: No fixed version is explicitly recorded in the structured CVE data.
- After
- zephyr: 3.5.0 < 4.4.2 · Fixed: No fixed version is explicitly recorded in the structured CVE data.
- Catalogue recordCVE added to the BlackTree catalogue.CNA ↗
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.