Evidence used
- No CISA KEV confirmation is currently recorded.
- Exploitation requires an existing local or physical foothold with privileges.
- EPSS is 0.14% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2026
CVE-2026-12634High confidence
Out-of-bounds stack write in the settings NVS backend from over-reported nvs_read length
zephyrproject · zephyr
5.3MediumCVSS 3.1
Scheduled
Patch availableMedium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityMedium→Operational priority:Low, lowered one band.downgradedsince 20 Aug 2026
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict local access and enforce least privilege on affected hosts.
- Monitor vendor guidance and exploitation sources for a material change.
Verification
- Confirm that the asset runs zephyrproject zephyr and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority.
Patch available01
What, why and how
The NVS backend of the Zephyr settings subsystem (subsys/settings/src/settings_nvs.c) reads stored setting-name entries into fixed 74-byte stack buffers and NUL-terminates them with buf[rc] = '\0', where rc is the return value of nvs_read(). Per its contract, nvs_read() returns the full stored entry length (wlk_ate.len), which can exceed the supplied buffer length — only MIN(len, stored_len) bytes are actually copied, but the return value may be much larger, bounded only by the NVS sector size. Three sites (settings_nvs_cache_match(), settings_nvs_load(), and settings_nvs_save()) used this value directly as the NUL index without clamping, so an oversized stored name entry causes a single \0 byte to be written past the end of the stack buffer at an attacker-influenced offset (CWE-787). The oversized entry cannot arise through the normal settings API, where names are bounded by SETTINGS_MAX_NAME_LEN. It requires an actor able to write the flash that backs the settings partition — a co-resident or untrusted component sharing the flash device, a malicious settings image/restore, or offline/physical flash access (a shared-flash threat model). The malformed entry is parsed when settings_load() runs at boot or subsystem init, or during settings_save(). The out-of-bounds write is a single NUL byte at an offset equal to the crafted entry length (up to the NVS sector size), so the practical impact is a crash or denial of service and limited stack corruption rather than reliable code execution. There is no confidentiality impact, and the path is not reachable from the network through the ordinary settings interface. The fix skips any entry whose nvs_read() length is greater than or equal to the buffer size before performing the NUL store.
What
The NVS backend of the Zephyr settings subsystem (subsys/settings/src/settings_nvs.c) reads stored setting-name entries into fixed 74-byte stack buffers and NUL-terminates them with buf[rc] = '\0', where rc is the return value of nvs_read(). Per its contract, nvs_read() returns the full stored entry length (wlk_ate.len), which can exceed the supplied buffer length — only MIN(len, stored_len) bytes are actually copied, but the return value may be much larger, bounded only by the NVS sector size. Three sites (settings_nvs_cache_match(), settings_nvs_load(), and settings_nvs_save()) used this value directly as the NUL index without clamping, so an oversized stored name entry causes a single \0 byte to be written past the end of the stack buffer at an attacker-influenced offset (CWE-787). The oversized entry cannot arise through the normal settings API, where names are bounded by SETTINGS_MAX_NAME_LEN. It requires an actor able to write the flash that backs the settings partition — a co-resident or untrusted component sharing the flash device, a malicious settings image/restore, or offline/physical flash access (a shared-flash threat model). The malformed entry is parsed when settings_load() runs at boot or subsystem init, or during settings_save(). The out-of-bounds write is a single NUL byte at an offset equal to the crafted entry length (up to the NVS sector size), so the practical impact is a crash or denial of service and limited stack corruption rather than reliable code execution. There is no confidentiality impact, and the path is not reachable from the network through the ordinary settings interface. The fix skips any entry whose nvs_read() length is greater than or equal to the buffer size before performing the NUL store.
Why
A bounds error lets data be written beyond the intended memory region, potentially corrupting control data.
How
An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may disrupt the affected service.
What
The NVS backend of the Zephyr settings subsystem (subsys/settings/src/settings_nvs.c) reads stored setting-name entries into fixed 74-byte stack buffers and NUL-terminates them with buf[rc] = '\0', where rc is the return value of nvs_read(). Per its contract, nvs_read() returns the full stored entry length (wlk_ate.len), which can exceed the supplied buffer length — only MIN(len, stored_len) bytes are actually copied, but the return value may be much larger, bounded only by the NVS sector size. Three sites (settings_nvs_cache_match(), settings_nvs_load(), and settings_nvs_save()) used this value directly as the NUL index without clamping, so an oversized stored name entry causes a single \0 byte to be written past the end of the stack buffer at an attacker-influenced offset (CWE-787). The oversized entry cannot arise through the normal settings API, where names are bounded by SETTINGS_MAX_NAME_LEN. It requires an actor able to write the flash that backs the settings partition — a co-resident or untrusted component sharing the flash device, a malicious settings image/restore, or offline/physical flash access (a shared-flash threat model). The malformed entry is parsed when settings_load() runs at boot or subsystem init, or during settings_save(). The out-of-bounds write is a single NUL byte at an offset equal to the crafted entry length (up to the NVS sector size), so the practical impact is a crash or denial of service and limited stack corruption rather than reliable code execution. There is no confidentiality impact, and the path is not reachable from the network through the ordinary settings interface. The fix skips any entry whose nvs_read() length is greater than or equal to the buffer size before performing the NUL store.
Why
A bounds error lets data be written beyond the intended memory region, potentially corrupting control data.
How
An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may disrupt the affected service.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material None recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.
- Likely attack path
- local access → Out-of-bounds Write → disrupt the affected service
- Attack surface
- Local
- Privileges required
- Low: a basic authenticated account is required
- User interaction
- None
- Attack complexity
- High: exploitation depends on specific conditions
- Security boundary
- Unchanged: impact remains within the vulnerable component's security authority
- Weakness
?
CWE means Common Weakness Enumeration: a standard category for the underlying weakness. - CWE-787 ↗
CWE-787: Out-of-bounds Write. The product writes data past the end, or before the beginning, of the intended buffer.
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:HCommon Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACHighAttack complexity: Successful exploitation depends on specific conditions outside the attacker's direct control.PRLowPrivileges required: The attacker needs basic user-level privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CNoneConfidentiality impact: No direct loss is represented by this metric.ILowIntegrity impact: A successful attack can cause a limited loss.AHighAvailability impact: A successful attack can cause a major loss.- Post-exploitation / living off the land
- The issue can support a local privilege or sandbox boundary transition; normal system utilities may then be available in the gained context.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Patch available
- Affected
- zephyr: 2.0.0 < 4.5.0
- Action
- Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
- Workaround
- No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04
Evidence and provenance
Published 19 Aug 2026 · Last source change 20 Aug 2026, 15:26 UTC · CWE-787 · Out-of-bounds Write
CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source FIRST · tracked since 2026-08-23
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2026-63076
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD awaiting enrichment
Core structured fields are present and their contributing authorities are shown above.
Material change intelligence
View recent updates ↗What changed after publication
- Catalogue recordCVE added to the BlackTree catalogue.CNA ↗
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.