BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2026-10673High confidence

Out-of-bounds write in ADIN2111/ADIN1110 OA SPI Ethernet RX frame reassembly

zephyrproject · zephyr

Official source article: GitHub GHSA-HM6V-4JH4-3QC4 ↗. Check the applicable product and release in the original source.

8.3HighCVSS 3.1
Recommended action
Within 7 days

High technical severity with public exploit material referenced by a structured source; prioritise exposed affected systems while verifying vendor guidance.

Patch available
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityHighOperational priority:High, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • A structured source references public exploit or proof-of-concept material.
  • EPSS is 0.42% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict local access and enforce least privilege on affected hosts.
  • Increase monitoring for the attack path and post-exploitation behaviour described in the report.

Verification

  1. Confirm that the asset runs zephyrproject zephyr and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 30 daysRemediation target: Within 180 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-44746

No EUVD known-exploited evidence

ENISA has published the identifier mapping but no EUVD description has been stored yet.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
Not supplied in the stored EUVD record
Advisory evidence
No linked advisory details stored yet
Recommended actionWithin 7 days

High technical severity with public exploit material referenced by a structured source; prioritise exposed affected systems while verifying vendor guidance.

Patch available
01

What, why and how

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

What

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

Why

A bounds error lets data be written beyond the intended memory region, potentially corrupting control data.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.

What

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

Why

A bounds error lets data be written beyond the intended memory region, potentially corrupting control data.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
Reference recorded

A structured CVE source labels at least one public reference as exploit material. BlackTree has not independently validated that it is safe, reliable or weaponised.

Likely attack path
an adjacent network → Out-of-bounds Write → disrupt the affected service
Attack surface
Adjacent
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Unchanged: impact remains within the vulnerable component's security authority
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-787 ↗

CWE-787: Out-of-bounds Write. The product writes data past the end, or before the beginning, of the intended buffer.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H

Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.

AVAdjacentAttack vector: The attacker must be on an adjacent or logically close network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CLowConfidentiality impact: A successful attack can cause a limited loss.IHighIntegrity impact: A successful attack can cause a major loss.AHighAvailability impact: A successful attack can cause a major loss.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
UnauthenticatedDenial of serviceCWE-787Public exploit reference
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

Cyber Security Agency of Singapore · English · CSA-SB-20260722Security Bulletin 22 Jul 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 22 Jul 2026, published on 22 July 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
JVN iPedia · Japanese · JVNDB-2026-028880Zephyr ProjectのZephyrにおける複数の脆弱性

ZephyrのADIN2111/ADIN1110 10BASE-T1S/T1Lイーサネットドライバー(drivers/ethernet/eth_adin2111.c)は、OPEN Alliance(OA)SPIモードで受信したイーサネットフレームを再構築する際、デバイスから提供される64バイトのデータチャンクを固定の静的バッファctx->buf(サイズはCONFIG_ETH_ADIN2111_BUFFER_SIZE、デフォルト1524バイト)にコピーしています。eth_adin2111_oa_data_read()関数では、有効な各チャンクをctx->buf[ctx->scur]にmemcpyでコピーし、書き込みカーソルscurを進めますが、scur + lenがバッファ内に収まるかのチェックは行っていません。チャンク数(最大255、BUFSTS RCAフィールドから取得)およびチャンクごとの長さはフレームデータから完全に取得され、カーソルはフレーム開始チャンク時のみリセットされます。そのため、単一ペアイーサネットセグメント上の攻撃者が、再構築後のサイズが設定されたバッファを超えるフレームを送信でき、ドライバーのRXオフロードスレッドが静的バッファの末尾を超えて攻撃者制御下のフレームバイトを近接するドライバーまたはカーネルメモリへ書き込んでしまう原因となります(最悪の場合約14.8KB)。これは遠隔または隣接可能な範囲で発生するバッファ外書き込み(CWE-787)であり、メモリ破損やサービス拒否、あるいはコード実行につながる可能性があります。この欠陥はOA SPIサポート追加時(コミット0ca8b0756b1)に導入され、v3.7.0からv4.4.0までのリリースに含まれています。修正では、境界チェックを追加し、サイズを超過したフレームを破棄するとともにコピー前にカーソルをリセットすることにより対処しています。

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Patch available
Affected
zephyr: 3.7.0 < 4.5.0
Fixed
An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
Action
Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 15 Jul 2026 · Last source change 15 Jul 2026, 18:01 UTC · CWE-787 · Out-of-bounds Write

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-14
European sourceENISA EUVD · EUVD-2026-44746
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD enriched

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. Vendor guidanceAuthoritative vendor guidance changed: added patch: github.com/158df8d088316cdae20816fc07703892280b2acb; added patch: github.com/GHSA-hm6v-4jh4-3qc4; 2 further additions.
    Before
    no authoritative guidance recorded
    After
    patch: github.com/158df8d088316cdae20816fc07703892280b2acb · patch: github.com/GHSA-hm6v-4jh4-3qc4 · patch: github.com/c98321cbfef23c0e3bdf043ccf6b421067c8d508 · 1 more references
    vulnerabilities@zephyrproject.org ↗
  2. Affected versionsThe structured affected or fixed version information changed.
    Before
    3.7.0 < 4.5.0 · Fixed: No fixed version is explicitly recorded in the structured CVE data.
    After
    3.7.0 < 4.5.0 · Fixed: An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
    CNA ↗
  3. Remediation statusRemediation status changed from Awaiting fix to Patch available.
    Before
    Awaiting fix
    After
    Patch available
    vulnerabilities@zephyrproject.org ↗
  4. Public exploit evidencePublic exploit evidence changed from Public exploit reference to Public exploit reference.
    Before
    Public exploit reference
    After
    Public exploit reference
    github.com ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2026-10673 · cve.blacktree.nl