BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2025-4675High confidence

Improper implementation of Modbus protocol leading to DOS attack

ABB · WebPro SNMP Card PowerValue

7.1HighCVSS 4.0
Recommended action
Within 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityHighOperational priority:High, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.21% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict local access and enforce least privilege on affected hosts.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs ABB WebPro SNMP Card PowerValue and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 30 daysRemediation target: Within 180 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
2CRT000009 · CSAF 2.0 · revision 1 · finalABB Product Security Incident Response Team (PSIRT)CVE-2025-4675
2 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • ABB WebPro SNMP Card PowerValue <=1.1.8.k
  • ABB WebPro SNMP Card PowerValue UL <=1.1.8.k
Summary
Modus(slave) protocol was implemented incorrectly in the device, port 502 becomes unstable and Modbus service is unavailable until manual reboot of the device.
Remediation
The problem is corrected in the following product versions: WebPro SNMP card PowerValue version 1.1.8.p ABB advises users of the affected product versions to reach out to ABB Digital Service Support (ch.ups.digital@abb.com) for guidance and recommended actions. Additionally, ABB recommends implementing defensive measures to reduce the risk of vulnerability exploitation, as outlined in the product instruction manual. Please refer to the section “Mitigation factors” for more information.
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2026-1210

No EUVD known-exploited evidence

ENISA has published the identifier mapping but no EUVD description has been stored yet.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
Not supplied in the stored EUVD record
Advisory evidence
No linked advisory details stored yet
Recommended actionWithin 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available
01

What, why and how

Improper Check for Unusual or Exceptional Conditions vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K.

What

Improper Check for Unusual or Exceptional Conditions vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K.

Why

The product does not check or incorrectly checks for unusual or exceptional conditions that are not expected to occur frequently during day to day operation of the product.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

Improper Check for Unusual or Exceptional Conditions vulnerability in ABB WebPro SNMP Card PowerValue, ABB WebPro SNMP Card PowerValue UL.This issue affects WebPro SNMP Card PowerValue: through 1.1.8.K; WebPro SNMP Card PowerValue UL: through 1.1.8.K.

Why

The product does not check or incorrectly checks for unusual or exceptional conditions that are not expected to occur frequently during day to day operation of the product.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
an adjacent network → Improper Check for Unusual or Exceptional Conditions → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Adjacent
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Not a CVSS 4.0 base metric
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-754 ↗

CWE-754: Improper Check for Unusual or Exceptional Conditions. The product does not check or incorrectly checks for unusual or exceptional conditions that are not expected to occur frequently during day to day operation of the product.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N

Common Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.

AVAdjacentAttack vector: The attacker must be on an adjacent or logically close network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.ATNoneAttack requirements: No additional deployment or execution condition is required.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.VCNoneVulnerable-system confidentiality: No direct loss is represented by this metric.VINoneVulnerable-system integrity: No direct loss is represented by this metric.VAHighVulnerable-system availability: A successful attack can cause a major loss.SCNoneSubsequent-system confidentiality: No direct loss is represented by this metric.SINoneSubsequent-system integrity: No direct loss is represented by this metric.SANoneSubsequent-system availability: No direct loss is represented by this metric.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
UnauthenticatedCWE-754
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

Canadian Centre for Cyber Security · English · AV26-011[Control systems] ABB security advisory (AV26-011)

On January 7, 2026, ABB published a security advisory to address vulnerabilities in the following products:

Official advisory ↗
Cyber Security Agency of Singapore · English · CSA-SB-20260114Security Bulletin 14 Jan 2026

The Cyber Security Agency of Singapore included this CVE in its official Security Bulletin 14 Jan 2026, published on 14 January 2026. Open the linked bulletin for the product, severity and reference information published in that issue.

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Patch available
Affected
Fixed
Action
The problem is corrected in the following product versions: WebPro SNMP card PowerValue version 1.1.8.p ABB advises users of the affected product versions to reach out to ABB Digital Service Support (ch.ups.digital@abb.com) for guidance and recommended actions. Additionally, ABB recommends implementing defensive measures to reduce the risk of vulnerability exploitation, as outlined in the product instruction manual. Please refer to the section “Mitigation factors” for more information.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 7 Jan 2026 · Last source change 7 Jan 2026, 17:20 UTC · CWE-754 · Improper Check for Unusual or Exceptional Conditions

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-14
European sourceENISA EUVD · EUVD-2026-1210
Product sourceVendor CSAF · ABB Product Security Incident Response Team (PSIRT)
Remediation sourceVendor CSAF · ABB Product Security Incident Response Team (PSIRT)
CWE sourceCNA
NVD statusNVD not scheduled

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. Affected versionsThe structured affected or fixed version information changed.
    Before
    ≤ 1.1.8.k · Fixed: No fixed version is explicitly recorded in the structured CVE data.
    After
    ≤ 1.1.8.k · Fixed: The problem is corrected in the following product versions: WebPro SNMP card PowerValue version 1.1.8.p ABB advises users of the affected product versions to reach out to ABB Digital Service Support (ch.ups.digital@abb.com) for guidance and recommended actions. Additionally, ABB recommends implementing defensive measures to reduce the risk of vulnerability exploitation, as outlined in the product instruction manual. Please refer to the section “Mitigation factors” for more information.
    ABB Product Security Incident Response Team (PSIRT) ↗
  2. Remediation statusRemediation status changed from Awaiting fix to Patch available.
    Before
    Awaiting fix
    After
    Patch available
    ABB Product Security Incident Response Team (PSIRT) ↗
  3. Vendor guidanceAuthoritative vendor guidance changed: added remediation: search.abb.com/Download.aspx?DocumentID=2CRT000009&LanguageCode=en&DocumentPartId=&Action=Launch; removed remediation: nvd.nist.gov/CVE-2025-4675.
    Before
    remediation: nvd.nist.gov/CVE-2025-4675
    After
    remediation: search.abb.com/Download.aspx?DocumentID=2CRT000009&LanguageCode=en&DocumentPartId=&Action=Launch
    ABB Product Security Incident Response Team (PSIRT) ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release recorded from official guidance
ENISA EUVD · EUVD-2026-1210↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2025-4675 · cve.blacktree.nl