Evidence used
- No CISA KEV confirmation is currently recorded.
- EPSS is 0.21% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2025
CVE-2025-40594High confidence
A vulnerability has been identified in SINAMICS G220 V6.4 (All versions < V6.4 HF2), SINAMICS S200 V6.4 (All versions < V6.4 HF7), SINAMICS S210 V6.4 (All versions < V6.4 HF2)
Siemens · SINAMICS G220 V6.4
Official source article: Siemens SSA-027652 ↗. Check the applicable product and release in the original source.
6.9MediumCVSS 4.0
Patch only the product branches with a verified fix
Fix availability varies by productMedium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 3 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityMedium→Operational priority:Medium, unchanged from published severity.unchanged
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict local access and enforce least privilege on affected hosts.
- Monitor vendor guidance and exploitation sources for a material change.
Verification
- Confirm that the asset runs Siemens SINAMICS G220 V6.4 and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Remediation availability differs by product scope
Verified remediation exists for at least one product or source, but 3 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
- Siemens ProductCERT: 3 affected or under-investigation product states without a fixed product state in the same current advisory
Direct vendor intelligence
1 currentAuthoritative vendor CSAF and VEX advisories
Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.
SSA-027652 · CSAF 2.0 · revision 2 · interimSiemens ProductCERTSSA-027652: Privilege Escalation Vulnerability in SINAMICS Drives
The vendor explicitly identifies these products as affected by this CVE.
- SINAMICS G220 V6.4
- SINAMICS S200 V6.4
- SINAMICS S210 V6.4
- Summary
- The affected devices allow a factory reset to be executed without the required privileges due to improper privilege management as well as manipulation of configuration data because of leaked privileges of previous sessions. This could allow an unauthorized attacker to escalate their privileges.
- Remediation
- Update to V6.4 HF2 or later version
Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 3 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
Fix availability varies by product01
What, why and how
A vulnerability has been identified in SINAMICS G220 V6.4 (All versions < V6.4 HF2), SINAMICS S200 V6.4 (All versions < V6.4 HF7), SINAMICS S210 V6.4 (All versions < V6.4 HF2). The affected devices allow a factory reset to be executed without the required privileges due to improper privilege management as well as manipulation of configuration data because of leaked privileges of previous sessions. This could allow an unauthorized attacker to escalate their privileges.
What
A vulnerability has been identified in SINAMICS G220 V6.4 (All versions < V6.4 HF2), SINAMICS S200 V6.4 (All versions < V6.4 HF7), SINAMICS S210 V6.4 (All versions < V6.4 HF2). The affected devices allow a factory reset to be executed without the required privileges due to improper privilege management as well as manipulation of configuration data because of leaked privileges of previous sessions. This could allow an unauthorized attacker to escalate their privileges.
Why
The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
How
An attacker operating through local access may attempt exploitation when the stated preconditions are met. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.
What
A vulnerability has been identified in SINAMICS G220 V6.4 (All versions < V6.4 HF2), SINAMICS S200 V6.4 (All versions < V6.4 HF7), SINAMICS S210 V6.4 (All versions < V6.4 HF2). The affected devices allow a factory reset to be executed without the required privileges due to improper privilege management as well as manipulation of configuration data because of leaked privileges of previous sessions. This could allow an unauthorized attacker to escalate their privileges.
Why
The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
How
An attacker operating through local access may attempt exploitation when the stated preconditions are met. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material None recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.
- Likely attack path
- local access → Improper Privilege Management → cause the confidentiality, integrity or availability impact described by the vendor
- Attack surface
- Local
- Privileges required
- None: unauthenticated exploitation is possible
- User interaction
- Active interaction required
- Attack complexity
- High: exploitation depends on specific conditions
- Security boundary
- Not a CVSS 4.0 base metric
- Weakness
?
CWE means Common Weakness Enumeration: a standard category for the underlying weakness. - CWE-269 ↗
CWE-269: Improper Privilege Management. The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:4.0/AV:L/AC:H/AT:P/PR:N/UI:A/VC:N/VI:H/VA:L/SC:N/SI:H/SA:LCommon Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.
AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACHighAttack complexity: Successful exploitation depends on specific conditions outside the attacker's direct control.ATPresentAttack requirements: A particular deployment or execution condition must be present.PRNonePrivileges required: The attacker does not need an account or existing privileges.UIActiveUser interaction: A user must take a deliberate action for exploitation to succeed.VCNoneVulnerable-system confidentiality: No direct loss is represented by this metric.VIHighVulnerable-system integrity: A successful attack can cause a major loss.VALowVulnerable-system availability: A successful attack can cause a limited loss.SCNoneSubsequent-system confidentiality: No direct loss is represented by this metric.SIHighSubsequent-system integrity: A successful attack can cause a major loss.SALowSubsequent-system availability: A successful attack can cause a limited loss.- Post-exploitation / living off the land
- The issue can support a local privilege or sandbox boundary transition; normal system utilities may then be available in the gained context.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Fix availability varies by product
- Action
- Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
- Workaround
- No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
Official vendor articles1 stored document
Linked articles are downloaded and versioned as source evidence. A CVE mention or approved update relationship does not, by itself, verify a fix for every product branch.
- SSA-027652 →Original publisher ↗Searchable text snapshot · Captured 29 Sep 2026Siemens Security Advisory by Siemens ProductCERT SSA-027652: Privilege Escalation Vulnerability in SINAMICS Drives Publication Date: 2025-09-09 Last Update: 2026-03-10 Current Version: V1.1 CVSS v3.1 Base Score: 6.3 CVSS v4.0 Base Score: 6.9 SUMMARY Siemens SINAMICS G220, SINAMICS S210, and SINAMICS S200 contai
04
Evidence and provenance
Published 9 Sept 2025 · Last source change 10 Mar 2026, 16:07 UTC · CWE-269 · Improper Privilege Management
CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source FIRST · tracked since 2026-08-14
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2025-27242
Product sourceVendor CSAF · Siemens ProductCERT
Remediation sourceVendor CSAF · Siemens ProductCERT
CWE sourceCNA
NVD statusNVD modified after enrichment
Core structured fields are present and their contributing authorities are shown above.
Material change intelligence
View recent updates ↗What changed after publication
- Remediation statusRemediation status changed from Awaiting fix to Mitigation available.Siemens ProductCERT ↗
- Before
- Awaiting fix
- After
- Mitigation available
CVE published
Remediation guidance recorded
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.