BlackTreeCVE Intelligence
← Back to the CVE catalogue
Full vulnerability report · 2026
CVE-2025-13778High confidence

Device Reboot Control

ABB · AWIN GW100 rev.2

7.1HighCVSS 4.0
Recommended action
Within 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available
R
Operational reassessment

Published severity in operational context

Open reassessment dashboard →
Published severityHighOperational priority:High, unchanged from published severity.unchanged

Evidence used

  • No CISA KEV confirmation is currently recorded.
  • EPSS is 0.27% for the current model date.

Compensating controls

  • Validate the affected product branch and deploy the verified fixed release.
  • Restrict local access and enforce least privilege on affected hosts.
  • Monitor vendor guidance and exploitation sources for a material change.

Verification

  1. Confirm that the asset runs ABB AWIN GW100 rev.2 and falls inside the recorded affected range.
  2. Verify the installed build against the product-specific fixed version after deployment.
  3. Validate exposure, authentication requirements and compensating controls in the actual environment.
  4. Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Mitigation target: Within 30 daysRemediation target: Within 180 days

This automated reassessment organises public evidence. It does not know asset exposure, business impact or control effectiveness and does not replace CVSS or a human risk decision.

Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

1 current
4JNO000329 · CSAF 2.0 · revision 1 · finalABB Product Security Incident Response Team (PSIRT)CVE-2025-13778
4 known affected

The vendor explicitly identifies these products as affected by this CVE.

  • ABB AWIN Firmware 2.0-0 installed on ABB AWIN GW100 rev. 2 Product ID: 3BNP102988R1
  • ABB AWIN Firmware 2.0-1 installed on ABB AWIN GW100 rev. 2 Product ID: 3BNP102988R1
  • ABB AWIN Firmware 1.2-0 installed on ABB AWIN GW120 Product ID 3BNP103003R1
  • ABB AWIN Firmware 1.2-1 installed on ABB AWIN GW120 Product ID 3BNP103003R1
Summary
An unauthenticated query allows an attacker to remotely reboot the device, potentially causing a denial of service.
Remediation
Do the following actions: - Stop and disconnect any AWIN gateways that are exposed directly to the Internet. - Ensure that physical controls are in place, so no unauthorized personnel can access your devices, components, peripheral equipment, and networks. - Ensure that all AWIN gateways are upgraded to the latest firmware version. Please find the latest version of firmware on the respective product Release Notes. - When remote access is required, only use secure methods. The problem is corrected in the following product versions: - AWIN GW100 rev2: v2.1-0 - AWIN GW120: v2.0-0 ABB recommends that customers contact ABB to obtain the updated firmware as soon as possible. ABB Service Support engineer shall apply the firmware update at earliest convenience.
Optional official sources

National CERT insights
?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

Choose official national sources for this report. Each advisory shows its original language. Your selection is remembered on this device and included in shared links.

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current
ENISA EUVD identifier

EUVD-2025-208633

No EUVD known-exploited evidence

ENISA has published the identifier mapping but no EUVD description has been stored yet.

EUVD state
Present in the current official mapping
Known exploitation
Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score
Not supplied in the stored EUVD record
Advisory evidence
No linked advisory details stored yet
Recommended actionWithin 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available
01

What, why and how

Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1.

What

Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1.

Why

A security-sensitive function is reachable without the authentication check that should protect it.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1.

Why

A security-sensitive function is reachable without the authentication check that should protect it.

How

An attacker operating through an adjacent network may attempt exploitation without authentication or user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

02

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material
?Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.
None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path
an adjacent network → Missing Authentication for Critical Function → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface
Adjacent
Privileges required
None: unauthenticated exploitation is possible
User interaction
None
Attack complexity
Low: no specialised conditions are recorded
Security boundary
Not a CVSS 4.0 base metric
Weakness
?CWE means Common Weakness Enumeration: a standard category for the underlying weakness.
CWE-306 ↗

CWE-306: Missing Authentication for Critical Function. The product does not perform any authentication for functionality that requires a provable user identity or consumes a significant amount of resources.

CVSS vector
?CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.
CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N

Common Vulnerability Scoring System 4.0: the compact vector below is decoded into plain language.

AVAdjacentAttack vector: The attacker must be on an adjacent or logically close network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.ATNoneAttack requirements: No additional deployment or execution condition is required.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.VCNoneVulnerable-system confidentiality: No direct loss is represented by this metric.VINoneVulnerable-system integrity: No direct loss is represented by this metric.VAHighVulnerable-system availability: A successful attack can cause a major loss.SCNoneSubsequent-system confidentiality: No direct loss is represented by this metric.SINoneSubsequent-system integrity: No direct loss is represented by this metric.SANoneSubsequent-system availability: No direct loss is represented by this metric.
Post-exploitation / living off the land
No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
UnauthenticatedCWE-306
A

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

Canadian Centre for Cyber Security · English · AV26-236[Control systems] ABB security advisory (AV26-236)

On March 11, 2026, ABB published a security advisory to address vulnerabilities in the following products:

Official advisory ↗
03

Patch and workaround

Operational remediation based on structured source evidence.

Status
?Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change.
Patch available
Affected
Fixed
Action
Do the following actions: - Stop and disconnect any AWIN gateways that are exposed directly to the Internet. - Ensure that physical controls are in place, so no unauthorized personnel can access your devices, components, peripheral equipment, and networks. - Ensure that all AWIN gateways are upgraded to the latest firmware version. Please find the latest version of firmware on the respective product Release Notes. - When remote access is required, only use secure methods. The problem is corrected in the following product versions: - AWIN GW100 rev2: v2.1-0 - AWIN GW120: v2.0-0 ABB recommends that customers contact ABB to obtain the updated firmware as soon as possible. ABB Service Support engineer shall apply the firmware update at earliest convenience.
Workaround
No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04

Evidence and provenance

Published 13 Mar 2026 · Last source change 13 Mar 2026, 13:35 UTC · CWE-306 · Missing Authentication for Critical Function

CVE recordCVE.org · 5.2
CVSS sourceCNA
EPSS source
?The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.
FIRST · tracked since 2026-08-14
European sourceENISA EUVD · EUVD-2025-208633
Product sourceVendor CSAF · ABB Product Security Incident Response Team (PSIRT)
Remediation sourceVendor CSAF · ABB Product Security Incident Response Team (PSIRT)
CWE sourceCNA
NVD statusNVD not scheduled

Core structured fields are present and their contributing authorities are shown above.

Material change intelligence

What changed after publication

View recent updates ↗
  1. Affected versionsThe structured affected or fixed version information changed.
    Before
    2.0-0; 2.0-1; 1.2-0; 1.2-1 · Fixed: No fixed version is explicitly recorded in the structured CVE data.
    After
    2.0-0; 2.0-1; 1.2-0; 1.2-1 · Fixed: Do the following actions: - Stop and disconnect any AWIN gateways that are exposed directly to the Internet. - Ensure that physical controls are in place, so no unauthorized personnel can access your devices, components, peripheral equipment, and networks. - Ensure that all AWIN gateways are upgraded to the latest firmware version. Please find the latest version of firmware on the respective product Release Notes. - When remote access is required, only use secure methods. The problem is corrected in the following product versions: - AWIN GW100 rev2: v2.1-0 - AWIN GW120: v2.0-0 ABB recommends that customers contact ABB to obtain the updated firmware as soon as possible. ABB Service Support engineer shall apply the firmware update at earliest convenience.
    ABB Product Security Incident Response Team (PSIRT) ↗
  2. Remediation statusRemediation status changed from Awaiting fix to Patch available.
    Before
    Awaiting fix
    After
    Patch available
    ABB Product Security Incident Response Team (PSIRT) ↗
  3. Vendor guidanceAuthoritative vendor guidance changed: added remediation: search.abb.com/Download.aspx?DocumentID=4JNO000329&LanguageCode=en&DocumentPartId=&Action=Launch; removed remediation: nvd.nist.gov/CVE-2025-13778.
    Before
    remediation: nvd.nist.gov/CVE-2025-13778
    After
    remediation: search.abb.com/Download.aspx?DocumentID=4JNO000329&LanguageCode=en&DocumentPartId=&Action=Launch
    ABB Product Security Incident Response Team (PSIRT) ↗
Material fields only · duplicate refreshes suppressed · history retained for the configured operational retention period
CVE published
Fixed release recorded from official guidance
ENISA EUVD · EUVD-2025-208633↗CVE authority or vendor reference↗Official CVE record (CNA and ADP data)↗NVD record↗
Technical terms and abbreviations used in this report
CVE
Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
CVSS
Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
EPSS
Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
CWE
Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
CNA
CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
CISA ADP
Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
NVD
National Vulnerability Database: NIST's enrichment service for CVE records.
CERT / CSIRT
A computer security incident response team that publishes warnings or coordinates incident response.
PoC
Proof of concept: public material that demonstrates or helps reproduce exploitation.
CSAF
Common Security Advisory Framework: a machine-readable format for security advisories.
LoTL
Living off the land: abuse of legitimate tools or system functions during an attack.
Free version - for non-commercial use only.CVE-2025-13778 · cve.blacktree.nl