Evidence used
- No CISA KEV confirmation is currently recorded.
- A structured source references public exploit or proof-of-concept material.
- EPSS is 0.36% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2023
CVE-2023-41057High confidence
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') in hyper-bump-it
plannigan · hyper-bump-it
Official source article: GitHub GHSA-XC27-F9Q3-4448 ↗. Check the applicable product and release in the original source.
5.5MediumCVSS 3.1
Within 7 days
Patch availableMedium technical severity with public exploit material referenced by a structured source; prioritise exposed affected systems while verifying vendor guidance.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityMedium→Operational priority:Medium, unchanged from published severity.unchanged
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict local access and enforce least privilege on affected hosts.
- Increase monitoring for the attack path and post-exploitation behaviour described in the report.
Verification
- Confirm that the asset runs plannigan hyper-bump-it and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Medium technical severity with public exploit material referenced by a structured source; prioritise exposed affected systems while verifying vendor guidance.
Patch available01
What, why and how
hyper-bump-it is a command line tool for updating the version in project files.`hyper-bump-it` reads a file glob pattern from the configuration file. That is combined with the project root directory to construct a full glob pattern that is used to find files that should be edited. These matched files should be contained within the project root directory, but that is not checked. This could result in changes being written to files outside of the project. The default behaviour of `hyper-bump-it` is to display the planned changes and prompt the user for confirmation before editing any files. However, the configuration file provides a field that can be used cause files to be edited without displaying the prompt. This issue has been fixed in release version 0.5.1. Users are advised to upgrade. Users that are unable to update from vulnerable versions, executing `hyper-bump-it` with the `--interactive` command line argument will ensure that all planned changes are displayed and prompt the user for confirmation before editing any files, even if the configuration file contains `show_confirm_prompt=true`.
What
hyper-bump-it is a command line tool for updating the version in project files.`hyper-bump-it` reads a file glob pattern from the configuration file. That is combined with the project root directory to construct a full glob pattern that is used to find files that should be edited. These matched files should be contained within the project root directory, but that is not checked. This could result in changes being written to files outside of the project. The default behaviour of `hyper-bump-it` is to display the planned changes and prompt the user for confirmation before editing any files. However, the configuration file provides a field that can be used cause files to be edited without displaying the prompt. This issue has been fixed in release version 0.5.1. Users are advised to upgrade. Users that are unable to update from vulnerable versions, executing `hyper-bump-it` with the `--interactive` command line argument will ensure that all planned changes are displayed and prompt the user for confirmation before editing any files, even if the configuration file contains `show_confirm_prompt=true`.
Why
Attacker-controlled path data is not constrained to the intended directory before the application accesses a file.
How
An attacker operating through local access may attempt exploitation without authentication after a user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.
What
hyper-bump-it is a command line tool for updating the version in project files.`hyper-bump-it` reads a file glob pattern from the configuration file. That is combined with the project root directory to construct a full glob pattern that is used to find files that should be edited. These matched files should be contained within the project root directory, but that is not checked. This could result in changes being written to files outside of the project. The default behaviour of `hyper-bump-it` is to display the planned changes and prompt the user for confirmation before editing any files. However, the configuration file provides a field that can be used cause files to be edited without displaying the prompt. This issue has been fixed in release version 0.5.1. Users are advised to upgrade. Users that are unable to update from vulnerable versions, executing `hyper-bump-it` with the `--interactive` command line argument will ensure that all planned changes are displayed and prompt the user for confirmation before editing any files, even if the configuration file contains `show_confirm_prompt=true`.
Why
Attacker-controlled path data is not constrained to the intended directory before the application accesses a file.
How
An attacker operating through local access may attempt exploitation without authentication after a user interaction. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material Reference recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.A structured CVE source labels at least one public reference as exploit material. BlackTree has not independently validated that it is safe, reliable or weaponised.
- Likely attack path
- local access → Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') → cause the confidentiality, integrity or availability impact described by the vendor
- Attack surface
- Local
- Privileges required
- None: unauthenticated exploitation is possible
- User interaction
- Required interaction required
- Attack complexity
- Low: no specialised conditions are recorded
- Security boundary
- Unchanged: impact remains within the vulnerable component's security authority
- Weakness
?
CWE means Common Weakness Enumeration: a standard category for the underlying weakness. - CWE-22 ↗
CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'). The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:NCommon Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UIRequiredUser interaction: Another user must perform an action for exploitation to succeed.SUnchangedScope: The security impact remains within the vulnerable component's authority.CNoneConfidentiality impact: No direct loss is represented by this metric.IHighIntegrity impact: A successful attack can cause a major loss.ANoneAvailability impact: No direct loss is represented by this metric.- Post-exploitation / living off the land
- The issue can support a local privilege or sandbox boundary transition; normal system utilities may then be available in the gained context.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Patch available
- Affected
- hyper-bump-it: < 0.5.1
- Action
- Review the linked authoritative reference and apply the recorded fixed release appropriate to the affected product branch.
- Workaround
- No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04
Evidence and provenance
Published 4 Sept 2023 · Last source change 27 Sept 2024, 15:22 UTC · CWE-22 · Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
CVE recordCVE.org · 5.1
CVSS sourceCNA
EPSS source FIRST · tracked since 2026-08-14
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2023-2612
Product sourceCNA
Remediation sourceCVE/CNA references
CWE sourceCNA
NVD statusNVD modified after enrichment
Core structured fields are present and their contributing authorities are shown above.
Material change intelligence
View recent updates ↗What changed after publication
No material field changes have been recorded since change tracking began. Routine source refreshes and cosmetic edits are intentionally excluded.
CVE published
Fixed release or patch reference recorded
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.