Evidence used
- No CISA KEV confirmation is currently recorded.
- The selected CVSS metric records a network-reachable, unauthenticated path with no user interaction.
- EPSS is 3.05% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2023
CVE-2023-3817High confidence
Excessive time spent checking DH q parameter value
OpenSSL · OpenSSL
Official source article: Siemens SSA-398330 ↗. Check the applicable product and release in the original source.
5.3MediumCVSS 3.1
Patch only the product branches with a verified fix
Fix availability varies by productMedium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 8 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityMedium→Operational priority:Medium, unchanged from published severity.unchanged
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict the affected network interface to trusted sources where business-safe.
- Monitor vendor guidance and exploitation sources for a material change.
Verification
- Confirm that the asset runs OpenSSL OpenSSL and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Remediation availability differs by product scope
Verified remediation exists for at least one product or source, but 8 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
- Siemens ProductCERT: 5 affected or under-investigation product states without a fixed product state in the same current advisory
- Siemens ProductCERT: 1 affected or under-investigation product state without a fixed product state in the same current advisory
- Siemens ProductCERT: 1 affected or under-investigation product state without a fixed product state in the same current advisory
- Siemens ProductCERT: 1 affected or under-investigation product state without a fixed product state in the same current advisory
Distribution package intelligence
8 package statesRelease-specific package status
Alpine, Debian, ubuntu findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.
Repository candidate not checked
A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.
| Distribution release | Source package | Vendor state | Fixed version | Evidence |
|---|---|---|---|---|
| Alpine v3.23v3.23 · main | openssl | Vendor fix publishedAlpine records a security fix at this version. An absent entry does not mean the package is unaffected. | 3.1.2-r0 | Alpine Security Database ↗Source updated 3 Oct 2026 |
| Alpine v3.22v3.22 · main | openssl | Vendor fix publishedAlpine records a security fix at this version. An absent entry does not mean the package is unaffected. | 3.1.2-r0 | Alpine Security Database ↗Source updated 3 Oct 2026 |
| Alpine v3.21v3.21 · main | openssl | Vendor fix publishedAlpine records a security fix at this version. An absent entry does not mean the package is unaffected. | 3.1.2-r0 | Alpine Security Database ↗Source updated 3 Oct 2026 |
| Debian trixietrixie · source | openssl | Vendor fix publishedDebian records a fixed source-package version for this release. | 3.0.10-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian bookwormbookworm · source | openssl | Vendor fix publishedDebian records a fixed source-package version for this release. | 3.0.10-1~deb12u1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian forkyforky · source | openssl | Vendor fix publishedDebian records a fixed source-package version for this release. | 3.0.10-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian sidsid · source | openssl | Vendor fix publishedDebian records a fixed source-package version for this release. | 3.0.10-1 | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Ubuntu 24.04 LTSnoble · standard archive | edk2 | Vendor fix publishedCanonical reports that a fixed source package version has been published. Repository candidate availability is not checked by BlackTree. | 2024.02-2ubuntu0.6 | Canonical Ubuntu Security ↗Source updated 5 Oct 2026 |
Direct vendor intelligence
5 currentAuthoritative vendor CSAF and VEX advisories
Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.
CVE-2023-3817 · CSAF 2.0 · revision 3 · finalRed Hat Product SecurityOpenSSL: Excessive time spent checking DH q parameter value
The vendor explicitly identifies these products as affected by this CVE.
- openssl as a component of Red Hat Enterprise Linux 6
- openssl-devel as a component of Red Hat Enterprise Linux 6
- openssl-perl as a component of Red Hat Enterprise Linux 6
- openssl-static as a component of Red Hat Enterprise Linux 6
- openssl.src as a component of Red Hat Enterprise Linux 6
- openssl as a component of Red Hat Enterprise Linux 7
- openssl-devel as a component of Red Hat Enterprise Linux 7
- openssl-libs as a component of Red Hat Enterprise Linux 7
- openssl-perl as a component of Red Hat Enterprise Linux 7
- openssl-static as a component of Red Hat Enterprise Linux 7
- openssl.src as a component of Red Hat Enterprise Linux 7
- compat-openssl10 as a component of Red Hat Enterprise Linux 8
- Summary
- A vulnerability was found in OpenSSL. This security issue occurs because the applications that use the DH_check(), DH_check_ex(), or EVP_PKEY_param_check() functions to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source may lead to a denial of service.
- Remediation
- Before applying this update, make sure all previously released errata relevant to your system have been applied. For details on how to apply this update, refer to: https://access.redhat.com/articles/11258
SSA-398330 · CSAF 2.0 · revision 18 · interimSiemens ProductCERTSSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5
The vendor explicitly identifies these products as affected by this CVE.
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)
- SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)
- SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)
- SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)
- Summary
- Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
- Remediation
- Update to V3.1.5 or later version
SSA-915275 · CSAF 2.0 · revision 1 · interimSiemens ProductCERTSSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3
The vendor explicitly identifies these products as affected by this CVE.
- SINEC INS
- Summary
- Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
- Remediation
- Update to V1.0 SP2 Update 3 or later version
SSA-943925 · CSAF 2.0 · revision 2 · interimSiemens ProductCERTSSA-943925: Multiple Vulnerabilities in SINEC NMS before V2.0 SP1
The vendor explicitly identifies these products as affected by this CVE.
- SINEC NMS
- Summary
- Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
- Remediation
- Update to V2.0 SP1 or later version
SSA-099606 · CSAF 2.0 · revision 1 · interimSiemens ProductCERTSSA-099606: Multiple Vulnerabilities in SIMATIC MV500 before V3.3.5
The vendor explicitly identifies these products as affected by this CVE.
- SIMATIC MV500 family
- Summary
- Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
- Remediation
- Update to V3.3.5 or later version
Medium technical severity with no CISA KEV confirmation; remediate through the normal risk-based patch cycle unless local exposure raises the priority. Verified remediation exists for at least one product or source, but 8 structured product or package states remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
Fix availability varies by product01
What, why and how
Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
What
Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
Why
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
How
An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.
What
Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
Why
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
How
An attacker operating through a network path may attempt exploitation without authentication or user interaction. If successful, the issue may disrupt the affected service.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material None recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.
- Likely attack path
- a network path → Unchecked Input for Loop Condition → disrupt the affected service
- Attack surface
- Network
- Privileges required
- None: unauthenticated exploitation is possible
- User interaction
- None
- Attack complexity
- Low: no specialised conditions are recorded
- Security boundary
- Unchanged: impact remains within the vulnerable component's security authority
- Weakness
?
CWE means Common Weakness Enumeration: a standard category for the underlying weakness. - CWE-606 ↗
CWE-606: Unchecked Input for Loop Condition. The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:LCommon Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVNetworkAttack vector: The vulnerable component can be reached over a network.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CNoneConfidentiality impact: No direct loss is represented by this metric.INoneIntegrity impact: No direct loss is represented by this metric.ALowAvailability impact: A successful attack can cause a limited loss.- Post-exploitation / living off the land
- No specific living-off-the-land technique is confirmed in the structured sources. Monitor normal administration tools for activity inconsistent with the affected service's baseline.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Fix availability varies by product
- Affected
- openssl as a component of Red Hat Enterprise Linux 6
- openssl-devel as a component of Red Hat Enterprise Linux 6
- openssl-perl as a component of Red Hat Enterprise Linux 6
- openssl-static as a component of Red Hat Enterprise Linux 6
- openssl.src as a component of Red Hat Enterprise Linux 6
- openssl as a component of Red Hat Enterprise Linux 7
- openssl-devel as a component of Red Hat Enterprise Linux 7
- openssl-libs as a component of Red Hat Enterprise Linux 7
- openssl-perl as a component of Red Hat Enterprise Linux 7
- openssl-static as a component of Red Hat Enterprise Linux 7
- openssl.src as a component of Red Hat Enterprise Linux 7
- compat-openssl10 as a component of Red Hat Enterprise Linux 8
- compat-openssl10.src as a component of Red Hat Enterprise Linux 8
- mingw-openssl.src as a component of Red Hat Enterprise Linux 8
- mingw32-openssl as a component of Red Hat Enterprise Linux 8
- mingw64-openssl as a component of Red Hat Enterprise Linux 8
- compat-openssl11 as a component of Red Hat Enterprise Linux 9
- compat-openssl11.src as a component of Red Hat Enterprise Linux 9
- Fixed
- jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server
- jws5-tomcat-native-0:1.2.31-16.redhat_16.el7jws.src as a component of Red Hat JBoss Web Server 5.7 for RHEL 7 Server
- jws5-tomcat-native-0:1.2.31-16.redhat_16.el7jws.x86_64 as a component of Red Hat JBoss Web Server 5.7 for RHEL 7 Server
- jws5-tomcat-native-debuginfo-0:1.2.31-16.redhat_16.el7jws.x86_64 as a component of Red Hat JBoss Web Server 5.7 for RHEL 7 Server
- jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8
- jws5-tomcat-native-0:1.2.31-16.redhat_16.el8jws.src as a component of Red Hat JBoss Web Server 5.7 for RHEL 8
- jws5-tomcat-native-0:1.2.31-16.redhat_16.el8jws.x86_64 as a component of Red Hat JBoss Web Server 5.7 for RHEL 8
- jws5-tomcat-native-debuginfo-0:1.2.31-16.redhat_16.el8jws.x86_64 as a component of Red Hat JBoss Web Server 5.7 for RHEL 8
- puppet-agent-0:7.26.0-3.el8sat.src as a component of Red Hat Satellite 6.13 for RHEL 8
- puppet-agent-0:7.26.0-3.el8sat.x86_64 as a component of Red Hat Satellite 6.13 for RHEL 8
- jws5-tomcat-native-0:1.2.31-16.redhat_16.el9jws.src as a component of Red Hat JBoss Web Server 5.7 for RHEL 9
- jws5-tomcat-native-0:1.2.31-16.redhat_16.el9jws.x86_64 as a component of Red Hat JBoss Web Server 5.7 for RHEL 9
- jws5-tomcat-native-debuginfo-0:1.2.31-16.redhat_16.el9jws.x86_64 as a component of Red Hat JBoss Web Server 5.7 for RHEL 9
- openssl-debuginfo-1:3.0.7-27.el9.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 9)
- openssl-debuginfo-1:3.0.7-27.el9.i686 as a component of Red Hat Enterprise Linux AppStream (v. 9)
- openssl-debuginfo-1:3.0.7-27.el9.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 9)
- openssl-debuginfo-1:3.0.7-27.el9.s390x as a component of Red Hat Enterprise Linux AppStream (v. 9)
- and 148 more
- Action
- Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
- Workaround
- No verified workaround is recorded. If business-safe, reduce exposure to the affected interface and allow only trusted sources until authoritative guidance is available.
04
Evidence and provenance
Published 31 Jul 2023 · Last source change 5 May 2025, 15:53 UTC · CWE-606 · Unchecked Input for Loop Condition
CVE recordCVE.org · 5.1
CVSS sourceNIST NVD
EPSS source FIRST · tracked since 2026-08-14
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2023-44449
Product sourceVendor CSAF · Red Hat Product Security
Remediation sourceVendor CSAF · Red Hat Product Security
CWE sourceCNA
NVD statusNVD modified after enrichment
Core structured fields are present and their contributing authorities are shown above.
Material change intelligence
View recent updates ↗What changed after publication
- Affected versionsThe structured affected or fixed version information changed.Siemens ProductCERT ↗
- Before
- 3.1.0 < 3.1.2; 3.0.0 < 3.0.10; 1.1.1 < 1.1.1v; 1.0.2 < 1.0.2zi · Fixed: An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
- After
- 3.1.0 < 3.1.2; 3.0.0 < 3.0.10; 1.1.1 < 1.1.1v; 1.0.2 < 1.0.2zi · Fixed: Update to V3.1.5 or later version
CVE published
Fixed release or patch reference recorded
Fixed release recorded from official guidance
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.