BlackTreeIndependent security intelligence

Full vulnerability report · 2023

CVE-2023-32233High confidence

In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory

n/a · n/a

7.8HighCVSS 3.1

Recommended action

Within 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available

Distribution package intelligence

Ubuntu vendor package status

Canonical’s release and source-package findings are shown separately from local repository availability.

1 package state

Repository candidate not checked

A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.

Ubuntu release	Source package	Vendor state	Fixed version	Evidence
Ubuntu 24.04 LTSnoble · standard archive	`linux-raspi-realtime`	Affected, no fix publishedCanonical OVAL identifies this running kernel flavour as affected and does not publish a fixed package version in this definition.	`Not published in this feed`	Canonical record ↗Source updated 9 Sept 2026

Direct vendor intelligence

Authoritative vendor CSAF and VEX advisories

Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.

3 current

2NGA002579 · CSAF 2.0 · revision 1 · finalABB Product Security Incident Response Team (PSIRT)ABB Arctic communication solution ARM600 Vulnerabilities

2 known affected

The vendor explicitly identifies these products as affected by this CVE.

ABB M2M Gateway ARM600, firmware versions >=4.1.2|<=5.0.3
ABB M2M Gateway SW, software versions >=5.0.1|<=5.0.3

Summary: In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. This could lead to an unprivileged local user gaining root access.
Remediation: Mitigating factors describe conditions and circumstances that make an attack that exploits the vulnerability difficult or less likely to succeed. The following mitigations are recommended. 1. Obtain a cellular private access point (APN). A dedicated private cellular access point and respective SIM card subscriptions can be requested from your cellular service provider. This service doesn’t expose the traffic between remote sites and main site to the internet but rather uses cellular operator’s private wide area network (WAN). Therefore, the ARM600 wouldn’t need open ports to the internet. 2. Avoid exposing any system component to the internet. If, however, the ARM600 is exposed to the internet, only the VPN port should be opened towards the internet (e.g., Patrol management connections can be configured to use VPN tunnel and remote administration connections can be implemented by using OpenVPN PC-client). 4. Perform firewall configuration by the "allowlisting" principle, i.e., explicitly allowing only the required ports and protocols and blocking any other traffic. 6. If the internet is used as a WAN media for carrying VPN tunnels, use Demilitarized Zone (DMZ) for terminating connections from the internet (i.e., the remote connections should terminate to the DMZ network, which would be segregated from other networks by a firewall. The ARM600 server would be located into this DMZ). 7. Change the default user credentials of ARM600 and Arctic wireless gateways into non-defaults and use complex non-guessable passwords with special characters. Do not reuse passwords within the system. 8. Use administrator (i.e., root user) privileges only when required by the task. 9. Supporting systems, such as PCs used for configuration, should be frequently updated. If possible, use dedicated site PCs for upgrading and engineering purposes. At minimum, PCs should be investigated by running a full virus scan with recently updated signature files before introducing the PC to the OT system. Any data, such as device configurations and firmware update files transferred to the Arctic system should be virus scanned prior to transferring. 10. Introduce a backup policy, which will ensure periodical backups and backup revision numbering. Consider the following: a. Check that the entire system has backups available from all applicable parts. b. Store the backups in a safe place (e.g. in an encrypted storage), restricted by role-based access control mechanisms. c. Ensure the security of the configuration PCs that may have local copies of device configurations. d. Validate the backups to make sure that they’re working. 11. Follow cyber security best practices for installation, operation, and decommissioning as described in the product’s Cyber Security Deployment Guideline and User Manual. 12. Use continuous monitoring (e.g., intrusion detection/prevention tools) to detect anomalies in the system 13. Consider hardening the system according to the following: a. Remove any unnecessary communication links in the system. b. If possible, close unused physical ports. c. Open only the necessary TCP/UDP ports in the configuration. d. Remove all unnecessary user accounts. e. Restrict traffic by firewall. f. Allow the traffic only from/to necessary hosts' IP addresses (i.e., define both source and destination in the firewall rules, where possible). g. Define client IP address as allowed address in SCADA communication protocols, if such configuration is supported. h. Remove or deactivate all unused processes, communication ports and services, where possible. i. Use physical access controls to the system installations (e.g., to server rooms and device cabinets).

SSA-794697 · CSAF 2.0 · revision 9 · interimSiemens ProductCERTSSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1

1 known affected

The vendor explicitly identifies these products as affected by this CVE.

SIMATIC S7-1500 TM MFP - GNU/Linux subsystem

Summary: In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.
Remediation: Update to V1.1 or later version

SSA-806742 · CSAF 2.0 · revision 1 · interimSiemens ProductCERTSSA-806742: Multiple Vulnerabilities in SCALANCE XCM-/XRM-300 before V2.4

11 known affected

The vendor explicitly identifies these products as affected by this CVE.

SCALANCE XCH328 (6GK5328-4TS01-2EC2)
SCALANCE XCM324 (6GK5324-8TS01-2AC2)
SCALANCE XCM328 (6GK5328-4TS01-2AC2)
SCALANCE XCM332 (6GK5332-0GA01-2AC2)
SCALANCE XRH334 (24 V DC, 8xFO, CC) (6GK5334-2TS01-2ER3)
SCALANCE XRM334 (230 V AC, 12xFO) (6GK5334-3TS01-3AR3)
SCALANCE XRM334 (230 V AC, 8xFO) (6GK5334-2TS01-3AR3)
SCALANCE XRM334 (24 V DC, 12xFO) (6GK5334-3TS01-2AR3)
SCALANCE XRM334 (24 V DC, 8xFO) (6GK5334-2TS01-2AR3)
SCALANCE XRM334 (2x230 V AC, 12xFO) (6GK5334-3TS01-4AR3)
SCALANCE XRM334 (2x230 V AC, 8xFO) (6GK5334-2TS01-4AR3)

Summary: In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.
Remediation: Update to V2.4 or later version

Official European source

ENISA European Vulnerability Database

Official EUVD identifiers, advisory evidence and known-exploited context. Missing fields are not treated as evidence of low risk.

1 current

ENISA EUVD identifier

EUVD-2023-36491

No EUVD known-exploited evidence

ENISA has published the identifier mapping but no EUVD description has been stored yet.

EUVD state: Present in the current official mapping
Known exploitation: Not present in the current ENISA EUVD known-exploited dataset. This is not proof of no exploitation.
ENISA score: Not supplied in the stored EUVD record
Advisory evidence: No linked advisory details stored yet

Recommended actionWithin 7 days

High technical severity; prioritise exposed affected systems while verifying vendor guidance.

Patch available

What, why and how

In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.

What

Why

The program can continue using memory after it has been released, producing unsafe and attacker-influenceable behaviour.

How

An attacker operating through local access may attempt exploitation with low privileges. If successful, the issue may cause the confidentiality, integrity or availability impact described by the vendor.

What

Why

The program can continue using memory after it has been released, producing unsafe and attacker-influenceable behaviour.

How

Exploit reality and attack path

CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.

Observed exploitation

Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.

No confirmed evidence

No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.

Public PoC / exploit material

Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.

None recorded

No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.

Likely attack path: local access → Use After Free → cause the confidentiality, integrity or availability impact described by the vendor
Attack surface: Local
Privileges required: Low: a basic authenticated account is required
User interaction: None
Attack complexity: Low: no specialised conditions are recorded
Security boundary: Unchanged: impact remains within the vulnerable component's security authority
Weakness ? CWE means Common Weakness Enumeration: a standard category for the underlying weakness.: CWE-416 ↗
CWE-416: Use After Free. The product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory belongs to the code that operates on the new pointer.
CVSS vector ? CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity.: CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Common Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRLowPrivileges required: The attacker needs basic user-level privileges.UINoneUser interaction: No action by another user is required.SUnchangedScope: The security impact remains within the vulnerable component's authority.CHighConfidentiality impact: A successful attack can cause a major loss.IHighIntegrity impact: A successful attack can cause a major loss.AHighAvailability impact: A successful attack can cause a major loss.
Post-exploitation / living off the land: The issue can support a local privilege or sandbox boundary transition; normal system utilities may then be available in the gained context.

CWE-416

Official authority intelligence

Only matched European and national findings are included. Language selectors and unavailable sources are omitted.

ENISA EUVD · EUVD-2023-36491Official EUVD mapping

0 linked advisory records.

Official EUVD record

BSI · German · WID-SEC-W-2023-2112IBM Spectrum Protect: Mehrere Schwachstellen

Ein lokaler oder entfernter Angreifer kann mehrere Schwachstellen in IBM Spectrum Protect ausnutzen, um seine Privilegien zu erhöhen, beliebigen Programmcode auszuführen, Sicherheitsvorkehrungen zu umgehen, einen Denial of Service Zustand herbeizuführen oder unbekannte Auswirkungen zu verursachen.

In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory

National CERT insights ?CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.

EUVD-2023-36491

What, why and how

Exploit reality and attack path

Official authority intelligence

Patch and workaround

Evidence and provenance

National CERT insights
?
CERT means Computer Emergency Response Team; CSIRT is the closely related term Computer Security Incident Response Team.