Evidence used
- No CISA KEV confirmation is currently recorded.
- EPSS is 1.27% for the current model date.
BlackTreeCVE IntelligenceFull vulnerability report · 2021
CVE-2021-37713High confidence
Arbitrary File Creation/Overwrite on Windows via insufficient relative path sanitization
npm · node-tar
Official source article: GitHub GHSA-5955-9WPR-37JH ↗. Check the applicable product and release in the original source.
8.2HighCVSS 3.1
Patch only the product branches with a verified fix
Fix availability varies by productHigh technical severity; prioritise exposed affected systems while verifying vendor guidance. Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
R
Open reassessment dashboard →Operational reassessment
Published severity in operational context
Published severityHigh→Operational priority:High, unchanged from published severity.unchanged
Compensating controls
- Validate the affected product branch and deploy the verified fixed release.
- Restrict local access and enforce least privilege on affected hosts.
- Monitor vendor guidance and exploitation sources for a material change.
Verification
- Confirm that the asset runs npm node-tar and falls inside the recorded affected range.
- Verify the installed build against the product-specific fixed version after deployment.
- Validate exposure, authentication requirements and compensating controls in the actual environment.
- Reopen this reassessment when CVSS, KEV, EPSS, exploit evidence or remediation changes.
Remediation availability differs by product scope
Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
- Siemens ProductCERT: 1 affected or under-investigation product state without a fixed product state in the same current advisory
Distribution package intelligence
7 package statesRelease-specific package status
Alpine, Debian findings are scoped to the named distribution, release and source package. An absent finding does not mean a package is unaffected.
Repository candidate not checked
A published vendor fix does not prove that a matching update is enabled and installable on a particular asset. Confirm the local package candidate before scheduling remediation.
| Distribution release | Source package | Vendor state | Fixed version | Evidence |
|---|---|---|---|---|
| Alpine v3.23v3.23 · main | nodejs | Vendor fix publishedAlpine records a security fix at this version. An absent entry does not mean the package is unaffected. | 14.17.6-r0 | Alpine Security Database ↗Source updated 3 Oct 2026 |
| Alpine v3.22v3.22 · main | nodejs | Vendor fix publishedAlpine records a security fix at this version. An absent entry does not mean the package is unaffected. | 14.17.6-r0 | Alpine Security Database ↗Source updated 3 Oct 2026 |
| Alpine v3.21v3.21 · main | nodejs | Vendor fix publishedAlpine records a security fix at this version. An absent entry does not mean the package is unaffected. | 14.17.6-r0 | Alpine Security Database ↗Source updated 3 Oct 2026 |
| Debian trixietrixie · source | node-tar | Not affectedDebian marks this release not affected (fixed-version marker 0). | Not published in this feed | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian bookwormbookworm · source | node-tar | Not affectedDebian marks this release not affected (fixed-version marker 0). | Not published in this feed | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian forkyforky · source | node-tar | Not affectedDebian marks this release not affected (fixed-version marker 0). | Not published in this feed | Debian Security Tracker ↗Source updated 5 Oct 2026 |
| Debian sidsid · source | node-tar | Not affectedDebian marks this release not affected (fixed-version marker 0). | Not published in this feed | Debian Security Tracker ↗Source updated 5 Oct 2026 |
Direct vendor intelligence
1 currentAuthoritative vendor CSAF and VEX advisories
Structured product status and remediation from the issuing vendor. Product-state explanations are always visible; large lists can be searched or downloaded.
SSA-389290 · CSAF 2.0 · revision 1 · finalSiemens ProductCERTSSA-389290: Third-Party Component Vulnerabilities in SINEC INS
The vendor explicitly identifies these products as affected by this CVE.
- SINEC INS
- Summary
- The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain .. path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as C:some\path. If the drive letter does not match the extraction target, for example D:\extraction\dir, then the result of path.resolve(extractionDirectory, entryPath) would resolve against the current working directory on the C: drive, rather than the extraction target directory. Additionally, a .. portion of the path could occur immediately after the drive letter, such as C:../foo, and was not properly sanitized by the logic that checked for .. within the normalized and split portions of the path. This only affects users of node-tar on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.
- Remediation
- Update to V1.0.1.1 or later version
High technical severity; prioritise exposed affected systems while verifying vendor guidance. Verified remediation exists for at least one product or source, but 1 structured product or package state remain unresolved. Apply remediation only to the exact product branch confirmed by its source.
Fix availability varies by product01
What, why and how
The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain `..` path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as `C:some\path`. If the drive letter does not match the extraction target, for example `D:\extraction\dir`, then the result of `path.resolve(extractionDirectory, entryPath)` would resolve against the current working directory on the `C:` drive, rather than the extraction target directory. Additionally, a `..` portion of the path could occur immediately after the drive letter, such as `C:../foo`, and was not properly sanitized by the logic that checked for `..` within the normalized and split portions of the path. This only affects users of `node-tar` on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.
What
The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain `..` path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as `C:some\path`. If the drive letter does not match the extraction target, for example `D:\extraction\dir`, then the result of `path.resolve(extractionDirectory, entryPath)` would resolve against the current working directory on the `C:` drive, rather than the extraction target directory. Additionally, a `..` portion of the path could occur immediately after the drive letter, such as `C:../foo`, and was not properly sanitized by the logic that checked for `..` within the normalized and split portions of the path. This only affects users of `node-tar` on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.
Why
Attacker-controlled path data is not constrained to the intended directory before the application accesses a file.
How
An attacker operating through local access may attempt exploitation without authentication after a user interaction. If successful, the issue may execute code or commands in the affected security context.
What
The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain `..` path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as `C:some\path`. If the drive letter does not match the extraction target, for example `D:\extraction\dir`, then the result of `path.resolve(extractionDirectory, entryPath)` would resolve against the current working directory on the `C:` drive, rather than the extraction target directory. Additionally, a `..` portion of the path could occur immediately after the drive letter, such as `C:../foo`, and was not properly sanitized by the logic that checked for `..` within the normalized and split portions of the path. This only affects users of `node-tar` on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.
Why
Attacker-controlled path data is not constrained to the intended directory before the application accesses a file.
How
An attacker operating through local access may attempt exploitation without authentication after a user interaction. If successful, the issue may execute code or commands in the affected security context.
02
Exploit reality and attack path
CVSS severity, EPSS forecast probability, public exploit material and CISA-confirmed exploitation are separate signals.
Observed exploitation No confirmed evidence
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No CISA KEV match was present at the last successful refresh. This means no confirmation from that source, not proof of no exploitation.
Public PoC / exploit material None recorded
?
Confirmed exploitation and public exploit material are separate signals. Attacks can occur without public proof-of-concept or exploit code.No exploit-tagged reference or CISA SSVC proof-of-concept state is currently recorded. Research may still exist outside the structured feeds.
- Likely attack path
- local access → Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') → execute code or commands in the affected security context
- Attack surface
- Local
- Privileges required
- None: unauthenticated exploitation is possible
- User interaction
- Required interaction required
- Attack complexity
- Low: no specialised conditions are recorded
- Security boundary
- Changed: exploitation can affect a different security authority
- Weakness
?
CWE means Common Weakness Enumeration: a standard category for the underlying weakness. - CWE-22 ↗
CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'). The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
- CVSS vector
?
CVSS means Common Vulnerability Scoring System. The vector records the metric values used to calculate technical severity. CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:NCommon Vulnerability Scoring System 3.1: the compact vector below is decoded into plain language.
AVLocalAttack vector: The attacker needs local access to the vulnerable system.ACLowAttack complexity: No specialised conditions are required beyond attacker-controlled input.PRNonePrivileges required: The attacker does not need an account or existing privileges.UIRequiredUser interaction: Another user must perform an action for exploitation to succeed.SChangedScope: The attack can affect a component governed by a different security authority.CHighConfidentiality impact: A successful attack can cause a major loss.IHighIntegrity impact: A successful attack can cause a major loss.ANoneAvailability impact: No direct loss is represented by this metric.- Post-exploitation / living off the land
- After compromise, an attacker may use built-in shells, scripting engines, scheduled tasks and native network utilities for discovery, persistence or movement. This is a plausible LoTL path, not evidence that it has occurred for every attack.
03
Patch and workaround
Operational remediation based on structured source evidence.
- Status
?
Patch availability is based on structured fixed-version fields and authoritative update references. If no fix is verified, check the vendor advisory before making a change. - Fix availability varies by product
- Affected
- SINEC INS
- Action
- Use the product-specific evidence above. Patch only products with a verified fixed release, and keep every affected or under-investigation state without a matching fix in the remediation queue.
- Workaround
- No verified workaround is recorded. Limit untrusted access and use least privilege until authoritative guidance is available.
04
Evidence and provenance
Published 31 Aug 2021 · Last source change 4 Aug 2024, 01:23 UTC · CWE-22 · Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
CVE recordCVE.org · 5.1
CVSS sourceCNA
EPSS source FIRST · tracked since 2026-08-14
?
The date BlackTree first stored a score for this CVE from the daily FIRST EPSS feed.European sourceENISA EUVD · EUVD-2021-1573
Product sourceVendor CSAF · Siemens ProductCERT
Remediation sourceVendor CSAF · Siemens ProductCERT
CWE sourceCNA
NVD statusNVD modified after enrichment
Core structured fields are present and their contributing authorities are shown above.
Material change intelligence
View recent updates ↗What changed after publication
- Affected versionsThe structured affected or fixed version information changed.Siemens ProductCERT ↗
- Before
- < 4.4.18; >= 5.0.0, < 5.0.10; >= 6.0.0, < 6.1.9 · Fixed: An authoritative update reference is available, but the fixed version is not recorded in the structured CVE fields. Check the linked vendor advisory for the applicable release.
- After
- < 4.4.18; >= 5.0.0, < 5.0.10; >= 6.0.0, < 6.1.9 · Fixed: Update to V1.0.1.1 or later version
CVE published
Fixed release or patch reference recorded
Fixed release recorded from official guidance
Technical terms and abbreviations used in this report
- CVE
- Common Vulnerabilities and Exposures: the public identifier for one disclosed vulnerability.
- CVSS
- Common Vulnerability Scoring System: a technical severity framework; it is not patching priority by itself.
- EPSS
- Exploit Prediction Scoring System: FIRST's estimate of the probability that exploitation activity will be observed in the next 30 days; it is a forecast, not confirmation.
- CWE
- Common Weakness Enumeration: the standard category describing the underlying software or hardware weakness.
- CNA
- CVE Numbering Authority: an organisation authorised to assign and publish CVE records.
- CISA ADP
- Cybersecurity and Infrastructure Security Agency Authorized Data Publisher: structured enrichment added to a CVE record.
- NVD
- National Vulnerability Database: NIST's enrichment service for CVE records.
- CERT / CSIRT
- A computer security incident response team that publishes warnings or coordinates incident response.
- PoC
- Proof of concept: public material that demonstrates or helps reproduce exploitation.
- CSAF
- Common Security Advisory Framework: a machine-readable format for security advisories.
- LoTL
- Living off the land: abuse of legitimate tools or system functions during an attack.